User Manual
Table Of Contents
- OSS-KIT-EXP-6002
- Table of Contents
- 1 Overview
- 2 Component Identification
- 3 Installation Instructions
- 4 Technical Information
- 4.1 Signal Adjustment
- 4.2 Pin Assignments
- 4.3 Pin-out for the PCIe x4 Card Edge Connector on the “Host Cable Adapter”
- 4.4 PCI Express x4 Connector PIN Assignment
- 4.5 Pin-out for the PCIe x4 Cable
- 4.6 Signal Descriptions
- 4.7 Connector Pin-outs for the PCIe x4 Cable Connector
- 4.8 PCI Express x4 Connector PIN Assignment
- 5 Contacting Technical Support
- 6 Returning Merchandise to One Stop Systems
One Stop Systems
OSS-KIT-EXP-6002| 3
1 Overview
1.1 Description
The PCIe x4 expansion kit is used to extend the PCI express bus from a host server to an external expansion chassis. The host adapter card
inserts into a PCIe slot of the server. It then cables to a downstream expansion link board (ELB). The ELB acts as a downstream cable link board
and the primary fan-out switch to support multiple configurations of PCI express expansion slots. The host adapter installs into a PCIe x4, x8 or
x16 slot on the host motherboard. It then cables to the expansion link board and installs in the SHB or system slot of a CPCIe backplane.