User Manual

One Stop Systems
OSS-KIT-EXP-6002| 12
4.6 Signal Descriptions
4.7 Connector Pin-outs for the PCIe x4 Cable Connector
PIN# SIGNAL DESCRIPTION
A1 GND Ground reference
A2 PETp0 Differential PCI Express Transmitter Lane 0
A3 PETn0
A4 GND Ground reference
A5 PETp1 Differential PCI Express Transmitter Lane 1
A6 PETn1
A7 GND Ground reference
A8 PETp2 Differential PCI Express Transmitter Lane 2
A9 PETn2
A10 GND Ground reference
A11 PETp3 Differential PCI Express Transmitter Lane 3
A12 PETn3
A13 GND Ground reference
A14 CREFCLK+ Differential 100MHz cable reference clock
A15 CREFCLK-
A16 GND Ground reference
A17 SB_RTN Side Band Return
A18 CPRSNT# Used for detection of external cable and if downstream system is powered
A19 CPWRON Turns power on / off to slave type downstream subsystems
B1 GND Ground reference
B2 PERp0 Differential PCI Express Receiver Lane 0
B3 PERn0
B4 GND Ground reference
B5 PERp1 Differential PCI Express Receiver Lane 1
B6 PERn1
B7 GND Ground reference
B8 PERp2 Differential PCI Express Receiver Lane 2
B9 PERn2
B10 GND Ground reference
B11 PERp3 Differential PCI Express Receiver Lane 3
B12 PERn3
B13 GND Ground reference
B14 PWR +3.3V Cable Power
B15 PWR
B16 PWR_RTN Cable Power Return
PETp(x) PCI Express Transmit Positive signal of (x) pair.
PETn(x) PCI Express Transmit Negative signal of (x) pair.
PERp(x) PCI Express Receive Positive signal of (x) pair.
PERn(x) PCI Express Receive Negative signal of (x) pair.
CREFCLK+/- Cable REFerence CLocK: Provides a reference clock from the host system to the remote system.
SB_RTN Side Band ReTurN: return path for single ended signals from remote systems.
CPRSNT# Cable PReSeNT: Indicates the presence of a device beyond the cable.
PWR
PoWeR: Provides local power for in-cable redriver circuits. Only needed on long cables. Power does not go
across the cable.)
PWR_RTN PoWeR ReTurN: Provides local power return path for PWR pins.
CWAKE# Cable WAKE
CPERST# Cable PCI Express Reset