User Guide

ION ACCELERATOR
Reboot and Select Proper Boot device
Please press the <DEL> key into BIOS setup menu.
or press the <CTRL-ALT-DEL> key to reboot system.
Step 4: Connect Power Cords
Quick Start Guide
Step 5: Connect the Mouse and Keyboard
Step 1: Remove the Face Plate or Front Cover
Step 6: Press the front “Power Button”
Orange LED should come ON immediately upon powering ON the system
Step 2: Connect VGA
Step 3: Connect Ethernet
Power Supply LED indicator will come up as solid green
Step 7: Boot Device
During the boot up process, splash screen will prompt to select boot drive. Go to
BIOS, select initial boot device, save settings and reboot. System will restart.
Final Step: Set Up using Interface Graphical Reference
Guide
Set Up using the following link:
https://docs.onestopsystems.com/docs/#/5.1.0/Graphical_User_Reference/?id=first-
time-setup
Need More Help?
Download the User Manual at www.onestopsystems.com
One Stop Systems Support: www.onestopsystems.com/support-0
Toll Free: [phone] Local: [phone]
Electrostatic Discharge (ESD) Warning
Electrostatic Discharge (ESD) is the enemy of semiconductor devices. You should
always take precautions to eliminate any electrostatic charge from your body and
clothing before touching any semiconductor device or card by using an
WARNING
electrostatic wrist strap and/or rubber mat.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received including interference that may cause undesired op-
eration.
Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada
CE
The product(s) described in this manual complies with all applicable European Union (CE) directives. One Stop Systems will
not retest or recertify systems or components that have been reconfigured by customers.
© 2019 ONE STOP SYSTEMS, INC.
25-097-057