User Manual
Table Of Contents
- OSS-412-BP User Manual
- Table of Contents
- 1 Overview
- 2 Component Identification
- 3 Installation Instructions
- 4 Contacting Technical Support
- 5 Returning Merchandise to One Stop Systems
One Stop Systems
OSS-BP-412 | 13
3.9 Backplane - PWR / FAULT LED
MODE LED Indicator / Description
Standby Controller is in the OFF condition, but it is not clear what the LED signal state is in the OFF condition. Since the LED is
powered by 12V input power (not controlled by PS_ON), the LED may shine in this state.
Operational Controller is in ON condition and power supplies are within specified limits. The LED will be OFF.
Malfunction If output power is not within specified limits, then LED will shine RED. Or the target board is not initialized
NOTE: The LED is a single color RED device.