User Manual
Table Of Contents
- OSS-412-BP User Manual
- Table of Contents
- 1 Overview
- 2 Component Identification
- 3 Installation Instructions
- 4 Contacting Technical Support
- 5 Returning Merchandise to One Stop Systems
One Stop Systems
OSS-BP-412 | 10
3.4 Connect Power
Connect +12v 4-PIN Aux power cable from your ATX power supply to either J3, J5 or both J3 and J5, see photos below.
If your ATX power supply does not have a separate +12V 4-pin connector, you can buy a P4-to-ATX Power Supply adapter, see photo below.
This cable is not sold by OSS. You can buy this from any online electronics stores. Use the description “P4-to-ATX Power Supply adapter” when
searching for the adapter cable on the web.