One PCIe x 16 3.0 slot Backplane(412) OSS-412-BP User Manual SKU: OSS-BP-412 www.onestopsystems.
One Stop Systems Table of Contents 1 Overview .......................................................................................................................................................................... 3 1.1 Description ................................................................................................................................................................................................ 3 1.2 Features ................................................................
One Stop Systems 1 Overview 1.1 Description The OSS target backplane supports a PCIe Gen3 target cable adapter installed in the OSS target slot and one PCIe x16 expansion card installed in the expansion / downstream slot. The slots are backward compatible and support Gen 1 and Gen 2 target adapters and expansion cards. Only target adapters with the OSS target slot configuration are supported. Expansion cards designed to the PCIe PCI-SIG specification are supported.
One Stop Systems 1.3 Specifications 1 PCIe x16 Gen 3 Target Slot backplane 412 (SKU : OSS-BP-412 ) Dimension (H x L) Power Slots OSS-BP-412 | 4 2.385” x 6.3” 12 VDC. Max:84 Watts, plus 84 watts with power extension 1 OSS target slot (Upstream Port) for target cable adapter only.
One Stop Systems 2 Component Identification 2.
One Stop Systems 2.2 Cable Adapter Cards Use any compatible OSS cable adapter cards. Always use a pair of cable adapter cards, one as host and the other as target, when connecting the backplane to host computer. Below photos are few example cable adapter cards you can use. 2.2.1 x4 Gen 2 iPass Cable Adapter Card SKU# OSS-PCIe-HIB25-x4 2.2.2 x16 Gen3 iPass Cable Adapter SKU# OSS-PCIe-HIB38-x16. For more details on the card, please read the OSS-PCIe-HIB36-x16 User’s Manual. 2.2.
One Stop Systems 2.2.4 Host Adapter Card The Host card can only be installed in the computer motherboard of a host computer. 2.2.5 Target cable adapter card The target adapter card inserts into the designated target slot (Upstream slot) on the OSS expansion backplane. Do not plug in the target card in the “Downstream slot” on the expansion backplane.
One Stop Systems 3 Installation Instructions 3.1 Install Host Card Insert the host cable adapter into an appropriate PCIe slot of the host computer. For example, a PCIe x4 host board can be inserted into a PCIe x16, x8, or x4 slot. It will still operate at x4 speeds. If you are using a x16 Gen3 cable adapter, use a x16 PCIe slot on the computer’s motherboard. Secure the cable adapter card 3.2 Install Target Card Insert the target cable adapter card into the PCIe slot (this is the designated slot).
One Stop Systems NOTE: Do not use the Endpoint slot (Expansion slot / Downstream slot) for the “Target Cable Adapter card”. 3.3 Plug in Add-in Card / 3rd Party PCIe card Plug in the add-in card or PCIe card in the available IO slot (Endpoint slot: also known as expansion slot and / or downstream slot), see photos below. Carefully plug in the add-in card or your 3rd party PCIe card (i.e. Ethernet card, Storage card, Video card, Sound Card and etc) in the downstream slot.
One Stop Systems 3.4 Connect Power Connect +12v 4-PIN Aux power cable from your ATX power supply to either J3, J5 or both J3 and J5, see photos below. If your ATX power supply does not have a separate +12V 4-pin connector, you can buy a P4-to-ATX Power Supply adapter, see photo below. This cable is not sold by OSS. You can buy this from any online electronics stores. Use the description “P4-to-ATX Power Supply adapter” when searching for the adapter cable on the web.
One Stop Systems 3.5 Connect Link Cable Connect the link cable between Target and Host cards. You can also use a x8 or x16 iPass or PCIe 3.0 cable, depending on the cable adapter cards you are using. 3.5.1 Connecting x4 Ipass Cable 3.5.
One Stop Systems 3.5.3 Connecting PCIe 3.0 Cables For more detail on how to properly connect the PCIe 3.0 cables, please read the manual for the HIB68x16 card. 3.6 Power Up the System Connect external power brick to the 2-slot backplane. The board LED will turn ON (as solid red). The board is at standby-mode. Power up the Host computer. It will instantly power up the Target card and the backplane (the red LED will turn OFF).
One Stop Systems 3.9 Backplane - PWR / FAULT LED MODE Standby LED Indicator / Description Controller is in the OFF condition, but it is not clear what the LED signal state is in the OFF condition. Since the LED is powered by 12V input power (not controlled by PS_ON), the LED may shine in this state. Operational Controller is in ON condition and power supplies are within specified limits. The LED will be OFF. Malfunction If output power is not within specified limits, then LED will shine RED.
One Stop Systems 4 Contacting Technical Support Our support department can be by phone at 1 (760) 745-9883. Support is available Monday through Friday, 8:00 AM to 5:00 PM PT.
One Stop Systems 2235 Enterprise Street, Suite#llO, Escondido CA 92029 Toll-Free: +1(800)285-8900 US• Main: +l (760) 745-9883 • Fax: +l (760) 745-9824 www.onestopsystems.
