Brochure

QUICKTRONIC

INTELLIGENT QTi GII
GL LB EU&LM FT, Edition: 13.03.2012. Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided.
TECHNICAL INFORMATION
02
Product Features:
 Up to 100.000 hours lifetime
1
 Lamp start with optimized filament preheating within 1 sec.
 Suitable for lighting with very high switching cycles
 Reliable lamp ignition between -20°C...+50°C
 Cut-off Technology
 Suitable for luminaries of protection classes I and II
2
 CELMA Energy Efficiency Index A2 BAT (Best Available Technology)
 Automatic safety shut-down in case of a defect or at the end of the lamp’s life (EoL T.2)
 Automatic restart after lamp replacement
 Suitable for emergency installations (DC operation)
Technical Data
Max. cable diameter
for IDC-contakt [mm
2
]:
„s“
3
: 0.5; „s-f“
4
: 0.75
Max. cable diameter for
push-in contact [mm
2
]:
„s“
3
: 0.5…1.0
Starting time:
t: < 1 sec.
(<0.3 sec. in case of line interruptions/switchover of <0.5 sec.)
Line voltage: 220 - 240 V
Voltage range (AC): 198 - 264 V
Voltage range (DC): 176 - 276 V
Line frequency: 0, 50 - 60 Hz
Operating frequency: 42 - 85 kHz
Electrical strength: 300 V  permanent, 320 V  48 hours, 350 V  2 hours
A
mbient temperature ta: -20 °C to +50 °C
Measuring point temperature tc: Max. +75 °C
U-OUT: 330 V
1
at T = 65°C @ Tc. 50.000 h with max. 10% failure rate at tc = 75°C max
2
No need to connect (functional) earth in suitable luminaires of protection class II
3
“s” = solid wire
4
“s-f” = stranded – flexible wire