User Manual

QUICKTRONIC FIT T8
GL LB EU&LM FT, Edition: 13.03.2012. Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided.
TECHNICAL INFORMATION
02
Product Features:
50.000 hours lifetime with max. failure rate of 10%
Lamp start with optimized filament preheating within 2 sec.
Suitable for lighting with high switching cycles
Reliable lamp ignition between -15°C...+50°C
Suitable for luminaries of protection class I
CELMA Energy-Efficiencies-Index A2
Automatic safety shut-down in case of a defect or at the end of the lamp’s life (EoL T.2)
Automatic restart after lamp replacement
Suitable for emergency installations (DC, 0 Hz)
Technical Data
Max. cable diameter for
push-in contact [mm
2
]:
s
1
: 0.5 - 1.5
Starting time:
t: 2 sec.
Line voltage:
220 - 240 V
Voltage range (AC):
198 - 264 V
Voltage range (DC):
185 - 264 V; for lamp ignition min. 198 V; max. 1 hour 185 - 198V
Line frequency:
50 - 60 Hz
Operating frequency:
40 - 50 kHz
Electrical strength:
280 V  permanent; 300 V  2 hours
Ambient temperature ta:
-15 °C to +50 °C
Measuring point temperature tc:
Max. +70 °C
U-OUT:
430 V
1
s = solid wire