Data Sheet

Version 1.0 LUW CR7P (streetwhite)
2012-06-27 19
Notes Hinweise
The evaluation of eye safety occurs according to the
standard IEC 62471:2006 ("photobiological safety
of lamps and lamp systems"). Within the risk
grouping system of this CIE standard, the LED
specified in this data sheet fall into the class
Moderate risk (exposure time 0,25 s). Under real
circumstances (for exposure time, eye pupils,
observation distance), it is assumed that no
endangerment to the eye exists from these devices.
As a matter of principle, however, it should be
mentioned that intense light sources have a high
secondary exposure potential due to their blinding
effect. As is also true when viewing other bright light
sources (e.g. headlights), temporary reduction in
visual acuity and afterimages can occur, leading to
irritation, annoyance, visual impairment, and even
accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach
dem Standard IEC 62471:2006 ("photobiological
safety of lamps and lamp systems"). Im
Risikogruppensystem dieser CIE- Norm erfüllen die
in diesem Datenblatt angegebenen LEDs folgende
Gruppenanforderung - Moderate risk
(Expositionsdauer 0,25s). Unter realen Umständen
(für Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen
Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass
intensive Lichtquellen durch ihre Blendwirkung ein
hohes sekundäres Gefahrenpotenzial besitzen.
Nach einem Blick in eine helle Lichtquelle (z.B.
Autoscheinwerfer), kann ein temporär
eingeschränktes Sehvermögen oder auch
Nachbilder zu Irritationen, Belästigungen,
Beeinträchtigungen oder sogar Unfällen führen.
Subcomponents of this LED are goldplated. In spite
of the improved corrosion stability of this
subcomponents, it can be affected by environments
that contain very high concentrations of aggressive
substances. Therefore, we recommend avoiding
aggressive atmospheres during storage, production
and use.
Einzelkomponenten dieser LED sind
goldbeschichtet. Trotz der dadurch vorhandenen
verbesserten Korrosionsstabilität können
Einzelkomponenten durch sehr hohe Konzentration
aggressiver Substanzen angegriffen werden. Aus
diesem Grund wird empfohlen aggressive
Umgebungen während der Lagerung, Produktion
und im Betrieb zu vermeiden.