Datasheet

Technical Information
No. DO 5650
OSRAM CLASSIC
Metal Halide Lamp
Edition: 01/08 - subject to change
Supersedes:
Status: valid
EMH 575 W/DE/60
Display/Optic Berlin


 Product description
The OSRAM CLASSIC EMH 575 W/DE/60 is a double-
ended metal halide lamp. Due to its very short arc length a
high luminance and efficacy is achieved. The EMH 575
W/DE/60 is designed for hot restart.


 Technical data
Lamp / order reference EMH 575 W/DE/60
Rated lamp wattage W 575
Lamp voltage V 95
Ignition voltage (cold, kHz ign.) kV 4.5
Ignition voltage MHz (cold / hot) kV
S
7 / 20 (max. 25 *)
Ignition voltage kHz kV
S
4,5
Lamp current (~) A 7
Luminous flux lm 42,000
Luminous efficacy lm/W 85
Color temperature K 6,000
Electrode gap e (cold) mm 7
Lamp length l
1
(over all) mm max. 135
Lamp length l
2
mm 115
Bulb diameter d (incl. pumping tip) mm 24
Average service life h 750
Base SFc10-4
* maximum peak value of surge voltage


 Lamp operation
Maximum permissible
pinch seal temperature
°C
230
Cooling Convection
Burning position any
The EMH 575 W/DE/60 can either be operated on standard ballasts or on electronic power supplies (ECG).


 Manufacturers of igniters and control gear (not all officially approved by OSRAM)
Ignitors: B AG MZN 10.005; Bauch 250K; Hansmann ZG 500 PRO and ZG 501 PRO;
Mitronic ZGV 40-11
Ballasts: May & Christe Typ HMI 575 W; BAG 230BK575; Vossloh Schwabe J575.400; irem BE-575; Sachtler
Ballast 575
ECGs: LEJ ebm 575; Mitronic PE 400-575, CE 50-575, PFPE60 Line;
Sachtler Netronic 575; Hansmann ER 575 and EFR 575; Schiederwerk 400/575, 575/700
Further information on operating and control device requirements is available with the OSRAM brochure "Guidelines for Control
Gear and Igniters - Metal Halide Lamps Photo Optics", order reference 123T01E.
l
d
1
l
2