Manual

ProPoint
TM
Outdoor Luminaire Small Light Pack (SLP)
Installation Guide


Readallinstructionscarefullybeforeattempting
installation.Ifyoudonotunderstandthese
instructions,pleaseconsultyourlocaldistributor.

Thoroughlyinspecttheluminaireforanyfreight
damage.Freightdamageshouldbereportedtothe
deliverycarrier.

Comparethecatalog/modelnumberdescriptionon
thepackingslipwiththefixturelabelto
assurethat
youhavereceivedthecorrectproduct.

Suitableformountingwithing1/2M(4ft)offthe
ground.

Nouserserviceablepartsinside.Contact
manufacturerforLEDreplacement.

Suitableforwetlocations.

Disconnectpowerduringinstallationandbefore
servicing.

Caution.RISKOFFIRE.Thisproductmustbeinstalled
in
accordancewiththeapplicationinstallationcodeby
apersonfamiliarwiththeconstructionandoperation
oftheproductandthehazardsinvolved(marking
providedoncarton).

Toensurepersonalsafety,propergroundingis
required.

Small Light Pack luminaire is available
in 15 and 30 watts with Type V
distribution
www.sylvania.com
Safet
y
Warnin
g
s:
Luminaire Installation:
Center the luminaire mounting plate over the junction box and attach using
mounting hardware. Pull supply wires through center hole of mounting plate.
Latch the Small Wallpack fixture onto bracket as illustrated.
Use supplied wire nuts to connect LED driver input leads to
supply leads (refer to wiring diagram on page 2). Push wire
and wire nuts up through hole in mounting plate and into
junction box.
Hinge fixture up to closed position and secure using large fixture
securing screw provided. Tighten to 40-50 in-lbs.


LED179

Securing screw
Fixture lens
Integrated hook/hinge
Luminaire wire
exit
Universal mounting
p
late
Universal mounting plate
Mounting hardware
(not included)
