Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsIR EmittersIR Emitter 860nm 100mA 1.7V TO-18

SFH 4855

Version 1.3 | 2018-05-29

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 4855

TO18

Infrared Emitter (850 nm)

Applications

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

Features:

— Package: hermetically sealed

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Wavelength 850nm

— Short switching times

— Spectral match with silicon photodetectors

Ordering Information

Type Radiant intensity

Radiant intensity

Ordering Code

typ.

= 100 mA; t

= 20 ms I

= 100 mA; t

= 20 ms

SFH 4855 40 ... 320 mW/sr 110 mW/sr Q65111A6128

SFH 4855-VAW 63 ... 200 mW/sr 110 mW/sr Q65111A9675

Summary of content (12 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 4855 SFH 4855 TO18 Infrared Emitter (850 nm) Applications ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: hermetically sealed ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Wavelength 850nm ——Short switching times ——Spectral match with silicon photodetectors Ordering Information Type Radiant intensity 1) IF = 100 mA; tp = 20 ms Ie SFH 4855 Ordering Code 40 ...
PAGE 2
SFH 4855 Maximum Ratings TA = 25 °C Parameter Symbol Operating temperature Top min. max. -40 °C 125 °C Storage temperature Tstg min. max. -40 °C 125 °C Reverse voltage 2) VR max. 12 V Forward current IF max. 100 mA Surge current tp ≤ 200 µs; D = 0 IFSM max. 1A Power consumption Ptot max. 200 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
SFH 4855 Characteristics IF = 100 mA; tp = 20 ms; TA = 25 °C Parameter Symbol Peak wavelength λpeak typ. 860 nm Centroid wavelength λcentroid typ. 850 nm Spectral bandwidth at 50% Irel,max ∆λ typ. 30 nm Half angle φ typ. 8° Dimensions of active chip area LxW typ. 0.3 x 0.3 mm x mm Distance chip surface to lens top H min. max. Rise time (10% / 90%) IF = 100 mA; RL = 50 Ω tr typ. 12 ns Fall time (10% / 90%) IF = 100 mA; RL = 50 Ω tf typ. 12 ns Forward voltage VF typ.
PAGE 4
SFH 4855 Brightness Groups TA = 25 °C Group Radiant intensity IF = 100 mA; tp = 20 ms min. Ie Radiant intensity IF = 100 mA; tp = 20 ms max. Ie U 40 mW/sr 80 mW/sr V 63 mW/sr 125 mW/sr AW 100 mW/sr 200 mW/sr BW 160 mW/sr 320 mW/sr Only one group in one packing unit (variation lower 2:1). Relative Spectral Emission 4), 5) Irel = f (λ); IF = 100 mA; tp = 20 ms OHF04132 100 I rel % 80 60 40 20 0 700 750 800 850 nm 950 λ 4 Version 1.
PAGE 5
SFH 4855 Radiation Characteristics 4), 5) Irel = f (φ) 40˚ 30˚ 20˚ 10˚ ϕ 0˚ OHF05678 1.0 50˚ 0.8 60˚ 0.6 70˚ 0.4 80˚ 0.2 0 90˚ 100˚ 1.0 0.8 Forward current 0.6 0.4 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ Relative Radiant Intensity 4), 5) IF = f (VF); single pulse; tp = 100 µs 4), 5) Ie/Ie(100mA) = f (IF); single pulse; tp = 100 µs OHF05645 103 mA 120˚ OHF05641 101 Ιe IF Ι e (100 mA) 102 100 5 10-1 101 10-2 5 100 0 1 2 3 V VF 5 Version 1.
PAGE 6
SFH 4855 Max. Permissible Forward Current Permissible Pulse Handling Capability IF,max = f (TA); RthJA = 500 K / W IF = f (tp); duty cycle D = parameter; TA = 25°C IF OHF05680 110 mA IF 90 0.9 80 0.8 70 0.7 60 0.6 50 0.5 40 0.4 30 0.3 20 0.2 10 0.1 0 0 25 50 75 100 ˚C 125 TA Permissible Pulse Handling Capability IF = f (tp); duty cycle D = parameter; TA = 85°C IF 1.1 A 1.1 A 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 OHF05682 t D = TP tP IF T D= 0.005 0.01 0.02 0.05 0.
PAGE 7
SFH 4855 Dimensional Drawing 6) Approximate Weight: 380.0 mg Package marking: Cathode Pin 1 Cathode Anode 2 Description 7 Version 1.
PAGE 8
SFH 4855 Recommended Solder Pad Pad 1: cathode 8 Version 1.
PAGE 9
SFH 4855 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
SFH 4855 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 11
SFH 4855 Glossary 1) Radiant intensity: Measured at a solid angle of Ω = 0.01 sr 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Total radiant flux: Measured with integrating sphere. 4) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures.