Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsIR EmittersIR Emitter 860nm 100mA 1.7V TO-46

SFH 4853

Version 1.2 | 2018-05-30

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 4853

TO46

Infrared Emitter (850 nm)

Applications

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

Features:

— Package: hermetically sealed

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Wavelength 850nm

— Anode is electrically connected to the case

— Short switching times

— Spectral match with silicon photodetectors

Ordering Information

Type Radiant intensity

Radiant intensity

Ordering Code

typ.

= 100 mA; t

= 20 ms I

= 100 mA; t

= 20 ms

SFH 4853 10 ... 50 mW/sr 25 mW/sr Q65111A6129

Summary of content (13 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 4853 SFH 4853 TO46 Infrared Emitter (850 nm) Applications ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: hermetically sealed ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Wavelength 850nm ——Anode is electrically connected to the case ——Short switching times ——Spectral match with silicon photodetectors Ordering Information Type Radiant intensity 1) IF = 100 mA; tp = 20 ms Ie 10 .
PAGE 2
SFH 4853 Maximum Ratings TA = 25 °C Parameter Symbol Operating temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage 2) VR max. 12 V Forward current IF max. 100 mA Surge current tp ≤ 200 µs; D = 0 IFSM max. 1A Power consumption Ptot max. 200 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
SFH 4853 Characteristics IF = 100 mA; tp = 20 ms; TA = 25 °C Parameter Symbol Peak wavelength λpeak typ. 860 nm Centroid wavelength λcentroid typ. 850 nm Spectral bandwidth at 50% Irel,max ∆λ typ. 30 nm Half angle φ typ. 32 ° Dimensions of active chip area LxW typ. 0.3 x 0.3 mm x mm Rise time (10% / 90%) IF = 100 mA; RL = 50 Ω tr typ. 12 ns Fall time (10% / 90%) IF = 100 mA; RL = 50 Ω tf typ. 12 ns Forward voltage VF typ. max. 1.
PAGE 4
SFH 4853 Relative Spectral Emission 4), 5) Irel = f (λ); IF = 100 mA; tp = 20 ms OHF04132 100 I rel % 80 60 40 20 0 700 750 800 850 nm 950 λ Radiation Characteristics 4), 5) Irel = f (φ) 40˚ 30˚ 20˚ 10˚ ϕ 50˚ 60˚ 0˚ 1.0 0.8 0.6 70˚ 0.4 80˚ 0.2 0 90˚ 1.0 0.8 100˚ OHF05685 4 Version 1.2 | 2018-05-30 0.6 0.
PAGE 5
SFH 4853 Forward current Relative Radiant Intensity 4), 5) IF = f (VF); single pulse; tp = 100 µs Ie/Ie(100mA) = f (IF); single pulse; tp = 100 µs OHF05645 103 mA 4), 5) OHF05641 101 Ιe IF Ι e (100 mA) 100 102 5 10-1 101 10-2 5 100 0 1 2 3 V 10-3 0 10 4 101 102 mA 103 IF VF Max. Permissible Forward Current Permissible Pulse Handling Capability IF,max = f (TA); RthJA = 500 K / W IF = f (tp); duty cycle D = parameter; TA = 25°C IF OHF05675 110 mA IF 90 80 70 1.1 A 0.
PAGE 6
SFH 4853 Permissible Pulse Handling Capability IF = f (tp); duty cycle D = parameter; TA = 85°C IF 1.1 A 0.9 OHF05682 t D = TP tP IF T 0.8 0.7 0.6 0.5 0.4 0.3 0.2 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 6 Version 1.
PAGE 7
SFH 4853 Dimensional Drawing 6) Approximate Weight: 360.0 mg Pin 1 2 7 Version 1.
PAGE 8
SFH 4853 Recommended Solder Pad Pad 1: cathode 8 Version 1.
PAGE 9
SFH 4853 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
SFH 4853 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 11
SFH 4853 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 12
SFH 4853 Glossary 1) Radiant intensity: Measured at a solid angle of Ω = 0.01 sr 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Total radiant flux: Measured with integrating sphere. 4) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures.