Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhototransistor 870nm 50 mA 70 V T1 3/4

SFH 314 FA

Version 1.3 | 2018-06-19

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 314 FA

Radial T1 3/4

Silicon NPN Phototransistor

Applications

— Building Control (Elevator, Light, …)

— Electronic Equipment

— Highbay Industrial

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

— White Goods

Features:

— Package: black epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Spectral range of sensitivity: (typ) 740 ... 1080 nm

— High linearity

Ordering Information

Type Photocurrent Ordering Code

= 5 V;

= 950 nm; E

= 0.5 mW/cm²

PCE

SFH 314 FA 630 ... 5000 µA Q62702P1675

SFH 314 FA-2/3 1000 ... 3200 µA Q62702P3599

Only one bin within one packing unit (variation less than 2:1)

Summary of content (14 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 314 FA SFH 314 FA Radial T1 3/4 Silicon NPN Phototransistor Applications ——Building Control (Elevator, Light, …) ——Electronic Equipment ——Industrial Automation (Machine controls, Light barriers, Vision controls) ——White Goods ——Highbay Industrial Features: ——Package: black epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Spectral range of sensitivity: (typ) 740 ...
PAGE 2
SFH 314 FA Maximum Ratings TA = 25 °C Parameter Symbol Operating temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Collector-emitter voltage VCE max. 70 V Collector current IC max. 50 mA Collector surge current τ ≤ 10 µs ICS max. 100 mA Emitter-collector voltage VEC max. 7V Total power dissipation Ptot max. 200 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
SFH 314 FA Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 870 nm Spectral range of sensitivity λ10% typ. 740 ... 1080 nm Chip dimensions LxW typ. 1x1 mm x mm Radiant sensitive area A typ. 0.55 mm² Half angle φ typ. 40 ° Dark current VCE = 10 V; E = 0 ICE0 typ. max. Rise time IC = 1 mA; VCC = 5 V; RL = 1 kΩ tr typ. 11 µs Fall time IC = 1 mA; VCC = 5 V; RL = 1 kΩ tf typ. 11 µs Collector-emitter saturation voltage 1) IC = IPCE,min X 0.
PAGE 4
SFH 314 FA Relative Spectral Sensitivity 2), 3) Srel = f (λ) OHF02331 100 S rel % 80 60 40 20 0 400 Directional Characteristics 600 800 1000 nm 1200 λ 2), 3) Srel = f (φ) 40 30 20 10 ϕ 50 60 0 1.0 0.8 0.6 70 0.4 80 0.2 0 90 1.0 0.8 100 OHF02329 4 Version 1.3 | 2018-06-19 0.6 0.
PAGE 5
SFH 314 FA Photocurrent Photocurrent 2), 3) IPCE = f (Ee) ; VCE = 5 V IPCE = f (VCE), Ee = Parameter OHF02339 10 1 mA Ι PCE 10 2), 3) OHF02338 10 1 mA Ι PCE 1 mW cm 2 0.5 0 mW cm 2 0.25 10 -1 mW cm 2 10 0 0.1 mW cm 2 10 -2 10 -3 -3 10 10 -2 Dark Current mW/cm 2 Ee 10 0 2), 3) ICE0 = f (VCE) ; E = 0 ; OHF02341 10 2 nA Ι CEO 10 1 10 0 10 -1 10 -2 10 20 30 40 50 0 5 Version 1.
PAGE 6
SFH 314 FA Collector-Emitter Capacitance 2), 3) CCE = f (VCE); f = 1 MHz; E = 0 ; C CE OHF02344 20 pF 15 10 5 0 -2 10 10 -1 10 0 10 1 V 10 2 VCE Dark Current Photocurrent 2) ICE0 = f (TA); E = 0 2) IPCE,rel = f (TA); VCE = 5 V OHF02342 10 3 nA Ι CEO Ι PCE 25 10 2 Ι PCE OHF01524 1.6 1.4 1.2 1.0 10 1 0.8 0.6 10 0 0.4 0.2 20 40 60 10 -1 0 6 Version 1.
PAGE 7
SFH 314 FA Power Consumption Ptot = f (TA) Ptot OHF02340 250 mW 200 150 100 50 0 0 20 40 60 80 ˚C 100 TA 7 Version 1.
PAGE 8
SFH 314 FA 4) 2.54 (0.100) spacing 0.8 (0.031) 0.4 (0.016) 0.6 (0.024) 0.4 (0.016) 1.2 (0.047) 29.5 (1.161) 27.5 (1.083) 3.4 (0.134) 278.0 mg Package marking: Collector 5.5 (0.217) 4.0 (0.157) Approximate Weight: 8 Version 1.3 | 2018-06-19 6.1 (0.240) 5.7 (0.224) 1.8 (0.071) Cathode (Diode) Collector (Transistor) 6.9 (0.272) ø4.8 (0.189) Area not flat ø5.1 (0.201) Dimensional Drawing 5.9 (0.232) 5.5 (0.217) 0.6 (0.024) 0.4 (0.
PAGE 9
SFH 314 FA Recommended Solder Pad Pad 1: emitter 9 Version 1.
PAGE 10
SFH 314 FA TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 10 Version 1.
PAGE 11
SFH 314 FA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 12
SFH 314 FA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 13
SFH 314 FA Glossary 1) IPCEmin: IPCEmin is the min. photocurrent of the specified group. 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.