Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 900 nm 150 mW THT

SFH 235 FA

Version 1.3 | 2018-05-04

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 235 FA

Radial Sidelooker

Silicon PIN Photodiode with Daylight Blocking Filter

Applications

— Electronic Equipment

— Highbay Industrial

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

— Smoke Detectors

— White Goods

Features:

— Package: black epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications of 880 nm

— Short switching time (typ. 20 ns)

— 5 mm LED plastic package

— Also available on tape and reel

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 0.5 mW/cm²;

= 870 nm; V

= 5 V E

= 0.5 mW/cm²;

= 870 nm; V

= 5 V

SFH 235 FA ≥ 40 µA 50 µA Q62702P0273

Summary of content (13 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 235 FA SFH 235 FA Radial Sidelooker Silicon PIN Photodiode with Daylight Blocking Filter Applications ——Electronic Equipment ——Smoke Detectors ——Highbay Industrial ——White Goods ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: black epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Especially suitable for applications of 880 nm ——Short switching time (typ.
PAGE 2
SFH 235 FA Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 32 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2 Version 1.
PAGE 3
SFH 235 FA Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 900 nm Spectral range of sensitivity λ10% typ. 740 ... 1120 nm Radiant sensitive area A typ. 7.02 mm² Dimensions of active chip area LxW typ. 2.65 x 2.65 mm x mm Half angle φ typ. 65 ° Dark current VR = 10 V IR typ. max. Spectral sensitivity of the chip λ = 870 nm Sλ typ. 0.65 A / W Quantum yield of the chip λ = 870 nm η typ. 0.
PAGE 4
SFH 235 FA Relative Spectral Sensitivity 1), 2) Srel = f (λ) OHF01430 100 Srel % 80 70 60 50 40 30 20 10 0 400 Directional Characteristics Srel = f (φ) 4 Version 1.
PAGE 5
SFH 235 FA Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ee) ΙP 1), 2) Dark Current 1), 2) IR = f (VR) ; E = 0 OHF01428 10 3 µA 10 2 10 4 mV OHF00080 4000 VO ΙR pA 10 3 3000 10 2 2000 10 1 1000 VO 10 1 ΙP 10 0 10 -1 10 0 10 1 10 2 µW/cm 2 10 0 10 4 Ee Capacitance 1), 2) C = f (VR); f = 1 MHz; E = 0; OHF00081 100 C pF 80 70 60 50 40 30 20 10 10 -1 10 0 10 1 0 -2 10 5 Version 1.
PAGE 6
SFH 235 FA Dark Current 2) IR = f (TA); E = 0; VR = 10 V Power Consumption Ptot = f (TA); OHF00398 160 mW Ptot 140 120 100 80 60 40 20 0 20 40 60 0 6 Version 1.
PAGE 7
SFH 235 FA Dimensional Drawing 3) 1.8 (0.071) 1.1 (0.043) 0.7 (0.028) 1.2 (0.047) Approximate Weight: 261.0 mg Package marking: Cathode 7 Version 1.3 | 2018-05-04 5.1 (0.201) 4.6 (0.181) 3.8 (0.150) 7.2 (0.283) 6.6 (0.260) 0.5 (0.020) 0.3 (0.012) 3.1 (0.122) 2.6 (0.102) Cathode Surface not flat 0.4 (0.016) 0.6 (0.024) 2.54 (0.100) spacing 0.75 (0.030) 0.45 (0.018) 35.5 (1.398) 33.5 (1.
PAGE 8
SFH 235 FA Recommended Solder Pad Pad 1: anode 8 Version 1.
PAGE 9
SFH 235 FA TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
SFH 235 FA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 11
SFH 235 FA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 12
SFH 235 FA Glossary 1) Testing temperature: TA = 25°C 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.