Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 900 nm 150 mW T1 3/4

SFH 213 FA

Version 1.3 | 2018-05-04

Produktdatenblatt | Version 1.1

www.osram-os.com

SFH 213 FA

Radial T1 3/4

Silicon PIN Photodiode

Applications

— Electronic Equipment

— Highbay Industrial

— Industrial Automation (Machine controls, Light

barriers, Vision controls)

— Smoke Detectors

— White Goods

Features:

— Package: black epoxy

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Wavelength range (S

10%

) 750 nm to 1100 nm

— Short switching time (typ. 5 ns)

— 5 mm LED plastic package

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1 mW/cm²;

= 870 nm; V

= 5 V E

= 1 mW/cm²;

= 870 nm; V

= 5 V

SFH 213 FA ≥ 65 µA 90 µA Q62702P1671

Summary of content (13 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 SFH 213 FA SFH 213 FA Radial T1 3/4 Silicon PIN Photodiode Applications ——Electronic Equipment ——Smoke Detectors ——Highbay Industrial ——White Goods ——Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ——Package: black epoxy ——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ——Wavelength range (S10%) 750 nm to 1100 nm ——Short switching time (typ.
PAGE 2
SFH 213 FA Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 20 V Reverse voltage t ≤ 2 min VR max. 50 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2 Version 1.
PAGE 3
SFH 213 FA Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 900 nm Spectral range of sensitivity λ10% typ. 750 ... 1100 nm Radiant sensitive area A typ. 1.00 mm² Dimensions of active chip area LxW typ. 1x1 mm x mm Half angle φ typ. 10 ° Dark current VR = 20 V IR typ. max. 1 nA 5 nA Spectral sensitivity of the chip λ = 870 nm Sλ typ. 0.65 A / W Quantum yield of the chip λ = 870 nm η typ. 0.
PAGE 4
SFH 213 FA Relative Spectral Sensitivity 1), 2) Srel = f (λ) OHF01773 100 S rel % 80 60 40 20 0 400 Directional Characteristics Srel = f (φ) 4 Version 1.
PAGE 5
SFH 213 FA Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ee) Capacitance 1), 2) Dark Current IR = f (VR) ; E = 0 1), 2) C = f (VR); f = 1 MHz; E = 0; 5 Version 1.
PAGE 6
SFH 213 FA Dark Current 2) IR = f (TA); E = 0; VR = 20 V Power Consumption Ptot = f (TA); OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 20 40 60 0 6 Version 1.
PAGE 7
SFH 213 FA Dimensional Drawing 3) 9.0 (0.354) 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) Cathode (Diode) Collector (Transistor) Approximate Weight: 350.0 mg Package marking: Cathode 7 Version 1.3 | 2018-05-04 7.5 (0.295) ø4.8 (0.189) 0.8 (0.031) 0.5 (0.020) 2.54 (0.100) spacing 0.6 (0.024) 0.4 (0.016) Area not flat 7.8 (0.307) ø5.1 (0.201) 8.2 (0.323) 5.9 (0.232) 5.5 (0.217) 5.7 (0.224) 0.6 (0.024) 5.1 (0.201) Chip position 0.4 (0.
PAGE 8
SFH 213 FA Recommended Solder Pad Pad 1: anode 8 Version 1.
PAGE 9
SFH 213 FA TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.
PAGE 10
SFH 213 FA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 11
SFH 213 FA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
PAGE 12
SFH 213 FA Glossary 1) Testing temperature: TA = 25°C 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.