Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsLEDsSMD LED White 255cd 1.6A

KW CELMM1.TG

Version 1.0 | 2019-12-05

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

KW CELMM1.TG

OSLON

Boost HM

OSLON Boost HM utilizes the high current capability

of the latest chip generation in a special package for

good thermal behaviour. The LED is characterized

by a high luminance of up to 255 cd / mm² and a

high luminous 󰘱ux. Therefore this LED is ideally suit-

ed as a powerful light source for ultra-slim headlamp

designs.

— Headlamps, LED & Laser & Night Vision

Features:

— Package: Ceramic package

— Chip technology: UX:3

— Typ. Radiation: 120° (Lambertian emitter)

— Color: Cx = 0.32, Cy = 0.33 acc. to CIE 1931 (● white)

— Corrosion Robustness Class: 3A

— Quali󰘰cations: AEC-Q102 Quali󰘰ed with RV-level 1

— ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)

Summary of content (26 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 KW CELMM1.TG KW CELMM1.TG OSLON ® Boost HM OSLON Boost HM utilizes the high current capability of the latest chip generation in a special package for good thermal behaviour. The LED is characterized by a high luminance of up to 255 cd / mm² and a high luminous flux. Therefore this LED is ideally suited as a powerful light source for ultra-slim headlamp designs.
PAGE 2
KW CELMM1.TG Ordering Information Type Luminous Flux 1) IF = 1500 mA ΦV KW CELMM1.TG-S3SA-ebvFfcbB46-8F8H 2 Version 1.0 | 2019-12-05 375 ...
PAGE 3
KW CELMM1.TG Maximum Ratings Parameter Symbol Operating Temperature 2) Top min. max. -40 °C 135 °C Storage Temperature Tstg min. max. -40 °C 135 °C Junction Temperature Tj max. 150 °C Junction Temperature for short time applications* Tj max. 175 °C Forward Current TS = 25 °C IF min. max. 50 mA 1650 mA Forward Current pulsed D = 0.005 ; TS = 25 °C IF pulse max. 2000 mA Surge Current t ≤ 10 µs; D = 0.005 ; TS = 25 °C IFS max. 2500 mA ESD withstand voltage acc.
PAGE 4
KW CELMM1.TG Characteristics IF = 1500 mA; TS = 25 °C Parameter Symbol Chromaticity Coordinate 4) Cx Cy typ. typ. 0.32 0.33 Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 5) IF = 1500 mA VF min. typ. max. 3.00 V 3.41 V 3.75 V Reverse voltage (ESD device) VR ESD min. 45 V Reverse voltage IR = 20 mA VR max. 1.2 V Real thermal resistance junction/solderpoint 6) RthJS real typ. max. 6.7 K / W 8.
PAGE 5
KW CELMM1.TG Brightness Groups Group Luminous Flux 1) IF = 1500 mA min. ΦV Luminous Flux 1) IF = 1500 mA max. ΦV S3 375 lm 395 lm S4 395 lm 415 lm S5 415 lm 435 lm S6 435 lm 460 lm S7 460 lm 485 lm S8 485 lm 510 lm S9 510 lm 535 lm SA 535 lm 560 lm Forward Voltage Groups Group Forward Voltage 5) IF = 1500 mA min. VF Forward Voltage 5) IF = 1500 mA max. VF 8F 3.00 V 3.25 V 8G 3.25 V 3.50 V 8H 3.50 V 3.75 V 5 Version 1.
PAGE 6
KW CELMM1.TG Chromaticity Coordinate Groups ebvF46-fcbB46 0,0 Cy Cx 0,2 0,4 0,6 0,8 550 nm 0,6 500 nm 600 nm 0,4 700 750 nm 0,2 0,0 400 380 nm Cy 0,36 0,35 fcbB46 0,34 ebzB46 ebxD46 0,33 ebvF46 0,32 0,31 0,310 0,315 0,320 0,325 Cx 6 Version 1.
PAGE 7
KW CELMM1.TG Chromaticity Coordinate Groups 4) Group Cx Cy Group Cx Cy ebvF46 0.3127 0.3093 ebzB46 0.3203 0.3274 0.3212 0.3175 0.3299 0.3361 0.3199 0.3325 0.3298 0.3526 0.3104 0.3234 0.3190 0.3430 0.3163 0.3181 0.3248 0.3370 0.3253 0.3266 0.3350 0.3460 0.3246 0.3424 0.3355 0.3633 0.3145 0.3330 0.3241 0.3534 ebxD46 7 Version 1.
PAGE 8
KW CELMM1.TG Group Name on Label Example: S3-ebvF46-8F Brightness Color Chromaticity S3 ebvF46 8 Version 1.
PAGE 9
KW CELMM1.TG Relative Spectral Emission 7) Φrel = f (λ); IF = 1500 mA; TJ = 25 °C Φrel KW CELMM1.TG 1,0 : Vλ : ultra white 0,8 0,6 0,4 0,2 0,0 350 400 Radiation Characteristics 450 500 550 600 650 700 750 800 λ / nm 7) Irel = f (ϕ); TJ = 25 °C KW CELMM1.TG ϕ/° -40° -50° -20° -10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1,0 -30° 0,8 0,6 -60° -70° 0,4 -80° 0,2 -90° 0,0 -100° 9 Version 1.
PAGE 10
KW CELMM1.TG Forward current Relative Luminous Flux 7) IF = f(VF); TJ = 25 °C IF / mA 7), 8) Φv/Φv(1500 mA) = f(IF); TJ = 25 °C KW CELMM1.TG 1650 ΦV KW CELMM1.TG 1,2 ΦV(1500mA) 1400 1,0 1200 0,8 1000 0,6 800 0,4 600 400 0,2 200 3,4 3,6 VF / V Chromaticity Coordinate Shift 7) ΔCx, ΔCy = f(IF); TJ = 25 °C ∆Cx ∆Cy KW CELMM1.TG 0,03 : ∆ Cx : ∆ Cy 0,02 0,01 0,00 -0,01 -0,02 16 50 12 00 80 0 40 0 50 -0,03 IF / mA 10 Version 1.
PAGE 11
KW CELMM1.TG Forward Voltage Relative Luminous Flux 7) ΔVF = VF - VF(25 °C) = f(Tj); IF = 1500 mA ∆VF / V 0,3 Φv/Φv(25 °C) = f(Tj); IF = 1500 mA KW CELMM1.TG Φv 1,2 KW CELMM1.TG Φv(25°C) 0,2 1,0 0,1 0,8 0,0 0,6 -0,1 0,4 -0,2 0,2 -0,3 -40 -20 0 20 40 60 80 100120140 Tj / °C 0,0 -40 -20 0 20 40 60 80 100120140 Tj / °C Chromaticity Coordinate Shift 7) ΔCx, ΔCy = f(Tj); IF = 1500 mA ∆Cx ∆Cy 7) 0,03 0,02 0,01 KW CELMM1.
PAGE 12
KW CELMM1.TG Max. Permissible Forward Current IF = f(T) IF / mA 1800 1700 1600 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 KW CELMM1.TG : Ts 0 20 40 60 80 100 120 140 T / °C Permissible Pulse Handling Capability Permissible Pulse Handling Capability IF = f(tp); D: Duty cycle IF = f(tp); D: Duty cycle KW CELMM1.TG KW CELMM1.TG TS = 0°C ... 109°C IF / A 2,4 2,2 TS = 135°C IF / A 2,0 1,8 2,4 2,2 : D = 1.0 : D = 0.5 : D = 0.2 : D = 0.1 : D = 0.05 : D = 0.
PAGE 13
KW CELMM1.TG Permissible F. Handling Capability Permissible F. Handling Capability f: Frequency f: Frequency KW CELMM1.TG KW CELMM1.TG TS = 0°C ... 109°C TS = 135°C IF / A "" " IF / A 2,0 2,0 1,5 1,5 1,0 1,0 0,5 0,0 : f = 60Hz : f = 120Hz : f = 240Hz : f = 400Hz : f = 800Hz : f = 1000Hz 0,5 0 10 20 30 40 50 60 70 80 90 100 Duty Cycle / % 13 Version 1.
PAGE 14
KW CELMM1.TG Dimensional Drawing 9) Further Information: Approximate Weight: 7.8 mg Corrosion test: Class: 3A Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43) ESD advice: The device is protected by ESD device which is connected in parallel to the Chip. 14 Version 1.
PAGE 15
KW CELMM1.TG Electrical Internal Circuit Recommended Solder Pad 9) For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. 15 Version 1.
PAGE 16
KW CELMM1.TG Reflow Soldering Profile Product complies to MSL Level 2 acc.
PAGE 17
KW CELMM1.TG Taping 9) 17 Version 1.
PAGE 18
KW CELMM1.TG Tape and Reel 10) Reel Dimensions A 180 mm W Nmin 12 + 0.3 / - 0.1 mm 18 Version 1.0 | 2019-12-05 W1 60 mm W2 max 12.4 + 2 mm 18.
PAGE 19
KW CELMM1.TG Barcode-Product-Label (BPL) Dry Packing Process and Materials 9) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
PAGE 20
KW CELMM1.TG Schematic Transportation Box 9) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 195 ± 5 mm 195 ± 5 mm 20 Version 1.
PAGE 21
KW CELMM1.
PAGE 22
KW CELMM1.TG Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 23
KW CELMM1.TG Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you.
PAGE 24
KW CELMM1.TG Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 1 ms, with an internal reproducibility of ±8 % and an expanded uncertainty of ±11 % (acc. to GUM with a coverage factor of k = 3). 2) Operating Temperature: The Operating Temperatur Top is referenced to the Solderpoint Ts of this device. Proper current derating must be observed to maintain junction temperature below the maximum.
PAGE 25
KW CELMM1.TG Revision History Version Date Change 1.0 2019-12-05 Initial Version 25 Version 1.