Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsLEDsSMD LED OSLON SSL 120 660nm Red 1212 350mA

GH CSSPM1.24

Version 1.12 | 2019-02-20

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

GH CSSPM1.24

OSLON

SSL 120

New, higher performing OSLON SSL family LED with

well known superior robustness, high reliability, long

lifetime, low thermal resistance. Perfectly addressing

applications demanding for high e󰘲ciency and long

lifetime requirement.

— Architecture — Horticulture Lighting

Features:

— Package: SMT ceramic package with silicone lens

— Typ. Radiation: 120° (Lambertian emitter)

— Lumen maintenance: Test results according to IESNA LM-80 available

— ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)

— Radiant Flux: typ. 425 mW

— Radiant E󰘲ciency: typ. 59 %

— Photosynthetic Photon Flux: typ. 2.32

mol/s

Summary of content (22 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 GH CSSPM1.24 GH CSSPM1.24 OSLON ® SSL 120 New, higher performing OSLON SSL family LED with well known superior robustness, high reliability, long lifetime, low thermal resistance. Perfectly addressing applications demanding for high efficiency and long lifetime requirement. Applications ——Architecture ——Horticulture Lighting Features: ——Package: SMT ceramic package with silicone lens ——Typ.
PAGE 2
GH CSSPM1.24 Ordering Information Type Total radiant flux 1) IF = 350 mA ΦE GH CSSPM1.24-4T2U-1-1-L 2 Version 1.12 | 2019-02-20 400 ...
PAGE 3
GH CSSPM1.24 Maximum Ratings Parameter Symbol Operating Temperature Top min. max. -40 °C 125 °C Storage Temperature Tstg min. max. -40 °C 125 °C Junction Temperature Tj max. 135 °C Forward current IF min. max. 100 mA 1000 mA Surge Current t ≤ 10 µs; D = 0.005 ; TJ = 25 °C IFS max. 2000 mA Reverse current 2) IR max. 200 mA ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) VESD 3 Version 1.
PAGE 4
GH CSSPM1.24 Characteristics IF = 350 mA; TJ = 25 °C Parameter Symbol Peak Wavelength λpeak typ. 660 nm Centroid Wavelength 3) IF = 350 mA λcentroid min. typ. max. 646 nm 657 nm 666 nm Dominant Wavelength 3) IF = 350 mA λdom typ. 640 nm Spectral Bandwidth at 50% Irel,max ∆λ typ. 25 nm Viewing angle at 50% IV 2φ typ. 120 ° Forward Voltage 4) IF = 350 mA VF min. typ. max. 1.80 V 2.07 V 2.60 V Reverse voltage 2) IR = 20 mA VR max. 1.
PAGE 5
GH CSSPM1.24 Brightness Groups Group Total radiant flux 1) Total radiant flux 1) PPF * PPF * PPF/W * BPF ** BPF ** BPF/W ** min. ΦE max. ΦE min. Φp max. Φp typ. min. Φp,b max. Φp,b typ. 4T 400 mW 450 mW 2.17 µmol/s 2.44 µmol/s 3.14 µmol/J 2.18 µmol/s 2.45 µmol/s 3.14 µmol/J 1U 450 mW 500 mW 2.44 µmol/s 2.71 µmol/s 3.50 µmol/J 2.45 µmol/s 2.72 µmol/s 3.51 µmol/J 2U 500 mW 560 mW 2.71 µmol/s 3.04 µmol/s 3.91 µmol/J 2.72 µmol/s 3.05 µmol/s 3.
PAGE 6
GH CSSPM1.24 Group Name on Label Example: 1U-1-F Brightness Wavelength 1U 1 6 Version 1.
PAGE 7
GH CSSPM1.24 Relative Spectral Emission 5) Irel = f (λ); IF = 350 mA; TJ = 25 °C Irel GH CSSPM1.24 1,0 : Vλ : hyper red 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 λ [nm] Radiation Characteristics 5) Irel = f (ϕ); TJ = 25 °C GH CSSPM1.24 ϕ [°] -20° -30° -10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° Irel 1,0 -40° 0,8 -50° -60° -70° -80° -90° -100° 7 Version 1.
PAGE 8
GH CSSPM1.24 Forward current Relative Radiant Power 5) IF = f(VF); TJ = 25 °C IF [mA] 5), 6) ΦE/ΦE(350 mA) = f(IF); TJ = 25 °C GH CSSPM1.24 Φe GH CSSPM1.24 1000 Φe(350mA) 2,5 800 2,0 600 100 1,8 2,0 2,2 2,4 2,6 VF [V] 8 Version 1.
PAGE 9
GH CSSPM1.24 Forward Voltage Relative Radiant Power 5) ΔVF = VF - VF(25 °C) = f(Tj); IF = 350 mA ∆VF [V] ΦE/ΦE(25 °C) = f(Tj); IF = 350 mA GH CSSPM1.24 0,20 5) ΦE GH CSSPM1.24 1,2 ΦE (25°C) 0,15 1,1 0,10 1,0 0,05 0,9 0,00 0,8 -0,05 0,7 -0,10 -0,15 -40 -20 0 20 40 60 80 100 120 Tj [°C] Centroid Wavelength 5) Δλcentr = λcentr - λcentr(25 °C) = f(Tj); IF = 350 mA ∆λ centr [nm] GH CSSPM1.24 20 10 0 -10 -20 -40 -20 0 20 40 60 80 100 120 Tj [°C] 9 Version 1.
PAGE 10
GH CSSPM1.24 Max. Permissible Forward Current IF = f(T) 10 Version 1.
PAGE 11
GH CSSPM1.24 Dimensional Drawing 7) Further Information Approximate Weight: 29.0 mg Package marking: Anode ESD advice: LED is protected by ESD device which is connected in parallel to LED-Chip. 11 Version 1.
PAGE 12
GH CSSPM1.24 Recommended Solder Pad IRRW SULQW 7) &X DUHD VROGHU UHVLVW VROGHU VWHQFLO For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Further information can be found in our Application Note: “Handling and Processing Details for Ceramic LEDs”. 12 Version 1.
PAGE 13
GH CSSPM1.24 Reflow Soldering Profile Product complies to MSL Level 2 acc.
PAGE 14
GH CSSPM1.24 Taping 7) 14 Version 1.
PAGE 15
GH CSSPM1.24 Tape and Reel 8) Reel Dimensions A 330 mm W Nmin 12 + 0.3 / - 0.1 mm 15 Version 1.12 | 2019-02-20 W1 60 mm W2 max 12.4 + 2 mm 18.
PAGE 16
GH CSSPM1.24 Barcode-Product-Label (BPL) Dry Packing Process and Materials 7) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
PAGE 17
GH CSSPM1.24 Schematic Transportation Box 7) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 349 ± 5 mm 349 ± 5 mm 17 Version 1.
PAGE 18
GH CSSPM1.24 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 19
GH CSSPM1.24 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS webside. Packing Please use the recycling operators known to you.
PAGE 20
GH CSSPM1.24 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Wavelength: The wavelength is measured at a current pulse of typically 10 ms, with a tolerance of ± 0.5 nm. 4) Forward Voltage: The Forward voltage is measured during a current pulse duration of typically 1 ms with a tolerance of ± 0.
PAGE 21
GH CSSPM1.24 Revision History Version Date Change 1.12 2019-02-20 Electro - Optical Characteristics (Diagrams) Characteristics 21 Version 1.