Datasheet

ManualsBrandsOsram Opto Semiconductors ManualsOptical DetectorsPhotodiode 950 nm 150 mW DIL

BP 104 FS

Version 1.6 | 2019-07-10

Produktdatenblatt | Version 1.1

www.osram-os.com

Applications

BP 104 FS

DIL SMT

Silicon PIN Photodiode with Daylight Blocking Filter

— Electronic Equipment

— Industrial Automation (Machine Controls, Light

Barriers, Vision Controls)

— Measurement Levelling

Features:

— Package: black epoxy

— Quali󰘰cations: The product quali󰘰cation test plan is based on the guidelines of AEC-Q101-REV-C,

Stress Test Quali󰘰cation for Automotive Grade Discrete Semiconductors.

— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications of 950 nm

— Short switching time (typ. 20 ns)

— DIL plastic package with high packing density

Ordering Information

Type Photocurrent Photocurrent Ordering Code

typ.

= 1 mW/cm²;

= 950 nm; V

= 5 V E

= 1 mW/cm²;

= 950 nm; V

= 5 V

BP 104 FS-Z ≥ 25 µA 34 µA Q65110A2627

Summary of content (19 pages)

PAGE 1
www.osram-os.com Produktdatenblatt | Version 1.1 BP 104 FS BP 104 FS DIL SMT Silicon PIN Photodiode with Daylight Blocking Filter Applications ——Measurement Levelling ——Electronic Equipment ——Industrial Automation (Machine Controls, Light Barriers, Vision Controls) Features: ——Package: black epoxy ——Qualifications: The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. ——ESD: 2 kV acc.
PAGE 2
BP 104 FS Maximum Ratings TA = 25 °C Parameter Symbol Operating Temperature Top min. max. -40 °C 100 °C Storage temperature Tstg min. max. -40 °C 100 °C Reverse voltage VR max. 12 V Reverse voltage t ≤ 2 µs; TA = 25 °C VR max. 20 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.
PAGE 3
BP 104 FS Characteristics TA = 25 °C Parameter Symbol Wavelength of max sensitivity λS max typ. 950 nm Spectral range of sensitivity λ10% typ. 800 ... 1100 nm Radiant sensitive area A typ. 4.84 mm² Dimensions of active chip area LxW typ. 2.2 x 2.2 mm x mm Half angle φ typ. 60 ° Dark current VR = 10 V IR typ. max. Spectral sensitivity of the chip λ = 950 nm Sλ typ. 0.7 A / W Quantum yield of the chip λ = 950 nm η typ. 0.91 Electrons / Photon Open-circuit voltage Ee = 0.
PAGE 4
BP 104 FS Relative Spectral Sensitivity 1), 2) Srel = f (λ) OHF00368 100 S rel % 80 60 40 20 0 700 Directional Characteristics 800 900 1000 nm λ 1200 1), 2) Srel = f (φ) 40 30 20 10 50 ϕ 0 1.0 0.8 60 0.6 70 0.4 80 0.2 0 90 1.0 0.8 100 OHF01402 4 Version 1.6 | 2019-07-10 0.6 0.
PAGE 5
BP 104 FS Photocurrent/Open-Circuit Voltage IP (VR = 5 V) / VO = f (Ee) Dark Current 1), 2) IR = f (VR); E = 0 OHF01056 10 3 µA ΙP 1), 2) 10 2 10 4 mV OHF00080 4000 VO ΙR pA 10 3 3000 10 2 2000 10 1 1000 10 0 0 VO 10 1 ΙP 10 0 10 -1 10 0 10 1 10 2 2 µW/cm 10 4 Ee Dark Current 1), 2) IR = f (VR); E = 0 OHF02284 10 2 nA ΙR 10 1 10 0 10 -1 0 2 4 6 8 10 12 14 16 V 20 VR 5 Version 1.
PAGE 6
BP 104 FS Capacitance 1), 2) C = f (VR); f = 1MHz; E = 0; TA = 25°C OHF01778 60 pF C 50 40 30 20 10 0 -2 10 10 -1 Dark Current 10 0 10 1 V 10 2 VR 1) IR = f (TA); E = 0; VR = 10 V OHF05717 104 IR nA 103 102 101 100 10-1 0 20 40 60 80 ˚C 100 TA 6 Version 1.
PAGE 7
BP 104 FS Power Consumption Ptot = f (TA) OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 0 20 40 60 80 ˚C 100 TA 7 Version 1.
PAGE 8
BP 104 FS Chip position 6.7 (0.264) 6.2 (0.244) 0.9 (0.035) 0.7 (0.028) 4.5 (0.177) 4.3 (0.169) 0...5 ˚ 0.2 (0.008) 0.1 (0.004) 1.1 (0.043) 0.9 (0.035) 1.6 (0.063) ±0.2 (0.008) 1.7 (0.067) 1.5 (0.059) 4.0 (0.157) 3.7 (0.146) 0.3 (0.012) 3) 1.2 (0.047) 1.1 (0.043) 0...0.1 (0...0.004) Dimensional Drawing Photosensitive area Cathode lead 2.20 (0.087) x 2.20 (0.087) GEOY6861 Further Information Approximate Weight: 44.0 mg Package marking: Cathode 8 Version 1.
PAGE 9
BP 104 FS Reflow Soldering Profile Product complies to MSL Level 4 acc.
PAGE 10
BP 104 FS 1.5 (0.059) 2 (0.079) 0.8 (0.031) 4.1 (0.161) 6.9 (0.272) 4 (0.157) 5.5 (0.217) Cathode/Collector Side 12 (0.472) 3) 1.75 (0.069) Taping OHAY2287 10 Version 1.
PAGE 11
BP 104 FS Tape and Reel 4) W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Reel Dimensions A 180 mm W Nmin 12 + 0.3 / - 0.1 mm 11 Version 1.6 | 2019-07-10 W1 60 mm W2 max 12.4 + 2 mm 18.
PAGE 12
BP 104 FS Barcode-Product-Label (BPL) Dry Packing Process and Materials 3) Moisture-sensitive label or print L E E V l e be sela ). k, H de L If an bl r co ba (R id m ity . H R hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr). or ct w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e.
PAGE 13
BP 104 FS Schematic Transportation Box 3) Barcode label N O : (Q )Q TY :2 00 0 (9 D ) D /C :0 (X ) Packing Sealing label Length 195 ± 5 mm 195 ± 5 mm 13 Version 1.
PAGE 14
BP 104 FS Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
PAGE 15
BP 104 FS Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you.
PAGE 16
BP 104 FS Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ.
PAGE 17
BP 104 FS Revision History Version Date Change 1.5 2019-06-24 Disclaimer 1.6 2019-07-10 Barcode-Product-Label (BPL) Notes 17 Version 1.
PAGE 18
BP 104 FS 18 Version 1.
PAGE 19
BP 104 FS 19 Version 1.