Instructions/Assembly Guide

ANTI-TIP KIT INSTUCTIONS

Wall

Safety Strap

Bracket

Connector

Long Screw

Short Screw

Anchor

STEPS:

Place in desired location. Carefully drill a ¼’’ pilot hole into wall, gently tap Anchor into pilot hole. Secure one Bracket

to wall using one Long Screw, FULLY TIGHTEN LONG SCREW USING PHILLIPS SCREWDRIVER (not provided).

Secure remaining Bracket to rear of top tray using one Short Screw, FULLY TIGHTEN SHORT SCREW USING

PHILLIPS SCREWDRIVER (not provided). Loop Safety Strap through Brackets and fasten Safety Strap.