Data Sheet

ManualsBrandsOSOP S.A. ManualsVibration SensorsTurnkey IoT Home Seismograph Raspberry Shake 1D

Specifications for:

The Original (1D) Raspberry Shake by OSOP

- Your Personal Seismograph -

An IoT home automation device

Born on: October, 2016

http://shop.raspberryshake.org/

sales@raspberryshake.org

Last updated: 23-february-2018

Unit

The Raspberry Shake Personal Seismograph is an all-in-one, IoT plug-and-go solution for

personal seismology- OSOP, S.A. integrates a vertical (1D) velocity sensor, the digitizer, the

hyper damper, and the computer into a single box



. The Raspberry Shake Personal

Seismograph is manufactured in Volcán, Panamá using cutting-edge 3D printing and

laser-cutting technology.

Warranty: 1 year from ship date

Specifications subject to change without notice.

Parameter

Value

Raspberry Shake Version

V6 / V5 / V4

Dimensions (estimated)

100x120x50 mm

Weight (estimated)

0.35 kg

Immersion rating

Standard enclosure



: IP10

IP67 enclosure available upon request at

additional cost

Connectors

Standard enclosure



: Ethernet (RJ45), Power

Micro USB (5V, 2.5 Amps), USB 2 ports x4,

Summary of content (10 pages)

PAGE 1
Specifications for: The Original (1D) Raspberry Shake by OSOP - Your Personal Seismograph An IoT home automation device Born on: October, 2016 http://shop.raspberryshake.org/ sales@raspberryshake.org Last updated: 23-february-2018 Unit The Raspberry Shake Personal Seismograph is an all-in-one, IoT plug-and-go solution for personal seismology- OSOP, S.A. integrates a vertical (1D) velocity sensor, the digitizer, the hyper damper, and the computer into a single box.
PAGE 2
HDMi, Micro SD, CSI Camera port, Composite video and audio output jack IP67 enclosure: Ethernet (RJ45), Power Installation Considerations Designed for plug-and-go installation Operating Temperature 0 to 60 C (limited by RPi, the Raspberry Shake itself can go to -40C) On Board Computer Wifi-enabled Raspberry Pi 3 Model B The Raspberry Shake board/ Software is also compatible with: 000[d,e]: Model B 00[10,13]: Model B+ a[01040,01041,21041]: 2 Model B 9000[92,93],920093: Zero a[02082,22082,a32082]:
PAGE 3
V6: +/- 10 ms or better @ 100 sps V5 / V4: +/- 20 ms or better @ 50 sps
PAGE 4
Seismograph Parameter Value Type Single-component 4.5 Hz 395 Ohm vertical Racotech RGI-20DX geophone with electronic extension to lower frequencies (<1 Hz) Samples per second V6: 100 sps V5 / V4: 50 sps Earthquake Early Warning (EEW) compatible* V6: data packets shipped across serial port at a rate of 4 packets/ second (250 ms/ packet) V5/ V4: data packets shipped across serial port at a rate of 1 packet/ second (1000 ms/ packet) Bandwidth (estimated) V6: -3dB points at 0.
PAGE 5
V5/V4: 18 mm/s peak-to-peak from 0.1 to 10 Hz Minimum Detection Threshold (estimate) V6: 0.03 µm/ s RMS from 1 to 20 Hz @ 100 sps V5/V4: 0.14 µm/ s RMS from 1 to 20 Hz @ 50 sps Note: The minimum detectable level is considered to be 10 dB above the noise RMS. Dynamic range is the full scale sinusoid RMS over the noise RMS in dB. Digitizer 24-bit ADC Sigma-Delta 𝚺𝚫 Dynamic range 144 dB (24 bits) Effective bits V6: 21 bits (126 dB) from 1 to 20 Hz @ 100 sps (estimated) V5/V4: 18.5 bits (110.
PAGE 6
Velocity Channel Instrument Response:
PAGE 7
Sleeman Self-Noise:
PAGE 8
Software Software installed on Raspberry Shake's RPi computer 100% SeisComP3 compatible Also: AQMS, Antelope, Earlybird, Earthworm, Hydra, ObsPy, SEISAN, … Native SeedLink Server (source: GEOFON) with OSOP Data Flow Message Router Tight and automatic integration with SeisComP Web-interface (HTML) for easy configuration Software to store continuous seismic data in miniSEED format Web-based helicorder plot generator (source: USGS) Swarm (source: USGS) Software distributed with Docker Automatic updates Operati
PAGE 9
Communications Parameter Value Digital bandwidth consumption at 50 Incoming rates RX: ~12.0 kbits/s Hz, 1 channel (estimated) Outgoing rates TX: ~47.0 kbits/s TCP Flow rate: 4.20 kbits/s Digital bandwidth consumption at 100 Hz, 1 channel (estimated) Incoming rates RX: ~24.0 kbits/s Outgoing rates TX: ~94.0 kbits/s TCP Flow rate: 8.40 kbits/s TCP/IP compatible Compatible with Wifi, Ethernet, Cell modem, GPRS, Satellite Power Parameter Value Power Supply Voltage 5 Volts DC (2.
PAGE 10
within 10% of the nominal instrument response (up to 10% variation attributable to geophones and capacitors). Questions? Email us at sales@raspberryshake.