Technical Specifications


OSI® QUAD® Invisible
Window, Door & Siding Sealant
Page 2 of 4
Typical Uncured
Physical Properties:
Color: Clear
Appearance: Lump-free paste
Base: Elastomeric polymers and synthetic resins
Odor: Solvent
Specific Gravity: 0.927
Flash Point: 80° F (26.7° C) Uncured product is flammable
% Solids by Weight: 65%
VOC Content: <35% by weight CARB
<340 g/l SCAQMD rule 1168
Shelf Life: 24 months from date of manufacture (unopened)
Lot Code Explanation: YYDDD
YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Example: 14061 = 61
st
day of 2014 = March 2, 2014
Typical Application
Properties:
Application Temperature: Apply between 20°F (-6°C) and 120°F (49°C)
For easier extrusion of sealant at lower temperatures, store cartridge at room temperature at
least 24 hours prior to use
Skin formation time: 40 minutes* At 72°F and 70% relative humidity
Tack Free Time: Approximately 8 hours*
Cure Time: 7-14 days or longer*
*Time is dependent on temperature, humidity and depth of sealant applied
Extrusion force: 75 lbs At 73°F
Boeing Sag (15 min): 0.20 inches At 73°F
Typical Cured
Performance Properties:
Color: Clear
Service Temperature: -20°F (-29°C) to 200°F (93°C)
Water Resistant: Yes
Paintable: Yes, after sealant is fully cured
Shrinkage: 26%
Hardness: 40 Shore A
180° Peel Adhesion: ASTM C794
Vinyl siding: 17 pli
Elongation: 1250% ASTM D412 Die C
Specifications: Meets the performance requirements of:
 ASTM C 920: Type S, Grade NS, Class 25, Use NT
 Federal Spec. TT-S-00230C, Type II



