Technical Specifications

OSI® QUAD® Invisible
Window, Door & Siding Sealant
Page 1 of 4
Description: OSI QUAD Invisible Window, Door & Siding Sealant all-season formula delivers superior
performance on exterior window, door and siding applications. It offers all the great benefits of OSI QUAD
in a crystal clear Invisible formula, perfect for finishing work around stone, brick and other fine building
materials. OSI QUAD Invisible can be applied to wet or dry surfaces, even at freezing temperatures. OSI
QUAD Invisible resists dirt & dust collection, yellowing and water washout, is self-tooling and is paintable
with either latex or oil-based paints once cured. OSI QUAD Invisible is composed of elastomeric polymers
and high quality synthetic resins. This product offers the superior adhesion characteristics and unmatched
elasticity found in high performance sealants. It yields a tough, rubbery seal which resists outdoor weather-
related elements like water, oxygen, ozone, heat and UV light. The formula skins over in a short time to
resist dirt and dust pickup. It goes on smoothly and has easy cut-off without stringing. When cured, the
surface displays a slight sheen similar to some silicone.
Available As:
Item # Size Color
1896952 9.5 fl oz (280 ml) Clear
Features & Benefits:
Clear “Invisible” Formula
All-Weather 20°F-120°F Application
Wet or Dry Surfaces
Resists Dirt & Dust Collection
Paintable
UV and Water Resistant
Permanently Flexible
3” Spout
Recommended For:
Sealing around exterior windows and doors, fiber-cement and vinyl siding, PVC trim, roofing and gutters. It bonds without a
primer to most common substrates like cedar, painted or stained woods, fiberglass, vinyl, coated aluminum, steel, metal, brick,
stone and concrete.
For Best Results:
Do not use for sealing expansion joints, including butt joints
Not compatible with polystyrene foams and polypropylene or polyethylene plastics
Do not use in applications requiring continuous water immersion
Do not use as a traffic bearing sealant, on log homes or inside occupied structures
For best results, should not be used in applications less than ¼” in depth in order to maintain the integrity of the sealant
Do not use to fill nail holes
For joints deeper than 3/8” (9.5 mm), a backing material should be used
Tooling, feathering or smearing of the sealant is not necessary or recommended
Coverage:
For a 9.5 fl. oz. (280 ml) cartridge:
A 1/4” (6 mm) bead extrudes approximately 29.1 ft. (8.9 m)
A 3/8” (9.5 mm) bead extrudes approximately 13.3 ft. (4 m)

Summary of content (4 pages)