Technical Specifications


OSI® QUAD® MAX
Window, Door & Siding Sealant
Page 2 of 4
Typical Uncured
Physical Properties:
Color: Various colors - 4,600 color matches listed on ositough.com
Appearance: Non-slumping paste
Base: Silane Modified Polymer
Odor: Alcohol
Specific Gravity: 1.4 – 1.5
Flash Point: 224.6° F (107° C)
VOC Content: 2.48% by weight CARB
36 g/l SCAQMD rule 1168`
Shelf Life: 24 months from date of manufacture (unopened) Under cool, dry storage conditions
Lot Code Explanation: YYDDD
YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Example: 14061 = 61
st
day of 2014 = March 2, 2014
Typical Application
Properties:
Application Temperature: Apply between 0°F (-18°C) and 140°F (60°C)
For easier extrusion of sealant at lower temperatures, store cartridge at room temperature at
least 24 hours prior to use
Skin Formation Time: 20-30 minutes* At 72°F and 70% relative humidity
Cure Time: 24-72 hours*
*Cure time is dependent on temperature, humidity and depth of sealant applied
Extrusion Rate: 42 ml/min ASTM C1183 (Procedure A)
Vertical Sag: 0 inches ASTM C639
Typical Cured
Performance Properties:
Color: Various colors
Service Temperature: -14.8°F (-26°C) to 158°F (70°C)
Water Resistant: Yes
Paintable: Yes, with latex paint
Nail-Hole Filling: Suitable when painted
Bubble Resistant: Yes
Hardness: 32 ASTM C661
Joint Movement: ± 50% ASTM C719
Tensile Strength: 234 psi ASTM D412
Maximum Elongation: 577% ASTM D412
180° Peel Adhesion: ASTM C794
PVC Trim:
Fiber Cement:
Coated (Painted) Aluminum:
Vinyl Siding:
Mortar:
47.6 lb/in
47.0 lb/in
51.1 lb/in
54.7 lb/in
42.0 lb/in
Specifications: Meets the performance requirements of:
 ASTM C 920: Type S, Grade NS, Class 50
 Federal Spec. TT-S-00230C, Type II
 AAMA 800 & AAMA 713-08
 ASTM C1382 (EIFS)
 GreenGuard® Certified
