Owner's Manual

INTRODUCTION
The BMA6012P is a major step forward in installation amplifiers technology. Twelve mono Zone power amplifiers,
featuring 85% class D design technology, can operate as 6 independent Zone amplifiers. Self-explanatory Input
and Output connections are easy to follow since any of the 12 mono amplifiers can be connected to either 70-Volt,
8-Ohm or 4-ohm speaker circuits.
Each of the 12 mono amplifiers has their own input and output connectors and level Controls. Up to 6 stereo
Zones (4-ohm or 70-Volt at 50Watts I channel), 6 mono I bridged Zone amplifiers (100 Watt bridged 8-ohm or
140-Volt
). Each zone can be configured independently allowing a combination of Stereo 4-ohm or 70 Volt and
Mono /Bridged 8-ohm or 140 Volt Zones.
Dual-function LEDs on the front panel provide both activity and Clip indication for each pair of amplifiers, which
also have their own button-selectable Limiter; Stereo/Bridge modes and 4-ohm I 70V modes are also selectable.
The Ch. Input Line / Bus switch selects between either the Bus Input (button depressed) or the individual Zone's
Input signal. Additional features include: any amplifier with no signal at its input is automatically shut off and the
BMA6012P
is able to operate either on 11 0V-120V / 60Hz or 220V-240V I 50Hz AC mains.
The BMA6012P comes configured to connect to
11 0V-120V / 60Hz mains.
For use with 220V-240V/50Hz mains set the rear panel Voltage Select switch to 220V-240V (also, replace the
T1 0.0AU250V fuse with a T5.0AL / 250V fuse).
1