User Guide

Double your pleasure: There maybe an issue with these dead spots with your home theater setup, especially if you have multiple
seating options either side to side, or side to side with front and back. These dead spots may change the listening experience for the
different seating positions. The latest solution to this problem involves adding a second subwoofer to fill in the dead spots. Typical 5.1 or
7.1 Audio Video Receivers can split the LFE output with a simple adaptor/splitter. The receiver featured in the diagram utilizes the 3.5mm
mono connection. The adaptor creates a dual mono connections allowing Two Powered Subwoofers to be connected. In most cases dual
10 inch woofers work better than a single 12 inch or two 12inch subs would sound better than a single 15 inch because of the sine wave
coverage from the two subs. Note, AVR manufacturers are starting to market 7.2 Receivers with Dual LFE outputs.
Male 3.5mm Mono to
dual Mono Female
RCA- sold separately
The Subwoofer cable is a
single Mono connection
that can be plugged into
either the R or L RCA
input of the S-10
The dead spots, there is a solution…