User Guide

WIRELESS REAR SPEAKER KIT
1111
)SID
• OPTIMAL
~~ .. ,... ----• SPEAKER
~UDIOoESIGN
Please read this user's guide before using your
new speaker kit.
User's Guide
Package
Contents
■ Transmitter ■ Receiver
■ 9V AC Adapter ■ 15V AC Adapter
■ Stands (2) ■ 6-foot speaker wire (2)
■ User's Guide
Features
■ 5.8GHz digital wireless link provides crystal-clear
audio signals.
■ Auto channel selection.
■ Up to 100 feet (30.5m) operation distance
between transmitter and receiver (line
of sight).
Install the Transmitter
1. Make sure your amplifier is off. Connect the
transmitter to your amplifier's speaker output
terminals with the provided 6-foot speaker wire,
matching polarities. Or connect your transmitter to
the amplifier's RCA output ports with RCA
cables (not included).
To subwoofer in
DC
IN 15V
NERO-WRSKII
2. Connect the supplied AC adapter (9V, 1.3A)
to the DC
IN 9V jack, then plug it into a standard
household outlet.
Install the Receiver
1. Connect the rear speakers to the receiver with
speaker wires, matching polarities.
2. Connect the supplied AC adapter (15V, 4A) to the
DC
IN 15V jack, and then plug it into a standard
household outlet.
Note:
■ Make sure the exposed tips of the speaker wires
do not touch each other, and make sure they are
fully inserted into the terminals.
■ This speaker kit is designed for connecting to your
amplifier surround speaker terminals only.
■ For speaker wires that have proprietary
connectors, you may need to strip the end
of
the wires to allow connection to the receiver.
However, check with the speaker manufacturer
before doing this, as it may void the warranty.
■ When the RCA cables are connected, audio input
from the speaker terminal will
be mixed.
■ Unplug the AC adapters from the AC outlet before
unplugging it from the transmitter
or receiver.
• Use the supplied AC adapters only. Using an AC
adapter not designed for this product may cause
damage.
Place
the Transmitter and Receiver
The transmitter and receiver must be placed within 100 feet
for proper operation. They can
be placed horizontally on a
flat surface, vertically
in the provided stands, or mounted on
a wall using the mounting holes on the bottom.
From amplifier speaker output