Owner's Manual

NERO MAX12 MANUAL
Power: 8 Ohm - 40W x 2 per zone
4 Ohm - 80W x 2 per zone
Bridge
S/N: >85dB A WTD
THD: <0.1%
Freq Response: 20Hz-20KHz
Input Impedance: >47 K Ohm
Input Sensitivity: 250mv
Protection: Overload, Short Circuit, Temperature
System Voltage: DC +12V
External Mute Voltage: DC +12V
Power Supply: AC 115V/60Hz - 230V/50Hz
Output Connection: Terminal Block
Dimensions: 16.9”W x 3.5”H x 16.4”D
Weight: 25lbs
• NERO MAX12 Amp
• Expansion Ribbon Cable
• Rack Ears (Pre Installed on Amp)
• Speaker Termainal Blocks (Pre Installed on Amp)
• AC Power Cable
• Product Manual
CONTENTS
SPECS
FEATURES
The NERO MAX12 is a functional, easy to install, highly compatible, expandable and user-friendly
audio distribution system. It features six Analog Source Inputs and provides up to 80W @4-ohm
from a Class D amplifier for six zones expandable to 12 or 18 zones which can be controlled by the
either the OSD Control App (Free App that Duplicates the Keypads), Optional Keypads with IR
Remote Control or RS-232.
• 6x6 Audio Matrix Switch with 6 Bridgeable Zones and Six Source Inputs
• Expandable to 2/3 units, 12/18 zones of distributed Audio.
• Free iOS & Android App duplicates the Control Panels for each
Zone/Room. Optional Control Pads/IR Remote are available as well.
• High Efficiency Class D Amplifier; 80 watts (4-ohms) and 40 watts (8-ohms)
Each Zone can drive a single 4-ohm pair of speakers or two pair of 8-ohm speakers
Stereo/Bridge Mono Output for combining zones 100 Watts at 8 ohm only
• 3 Stereo line-level Pre-AMP L&R RCA Outputs (Zones 1-3)
• 6 Stereo line-level L&R RCA Analog Source Inputs
• RS232 for transferring and receiving the serial data between two devices.
• 6 Individual Zone Status (3.5mm): Used to control external Zone Devices (12V triggers)
• 6 IR Emitter 3.5mm Mono RCA outputs + 1 IR Emitter/Blaster 3.5mm Mono All Output
• 1 PA Input jack to set all zones to Source 1 (12Vdc Trigger)
• External Mute In/Control Out (3.5mm Mono RCA connections/12Vdc)
• AGC (Automatic Gain Control): brings low input levels up to a preset-level
• Unit ID Selector Switch: Master/Slave 1/Slave 2( Expandable settings)
• Multi Voltage Selector 115V or 230V, AC Input connection with Fuse Receptable (CE Certified)