OS-3D Otamic LE
1-4 4 5-7 6 Chair installation ................................................................................... 8 9-10 Moving the massage chair ....................................................................
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance). DANGER To reduce the risk of electric shock: • Always unplug this appliance from the electrical outlet immediately after using and before cleaning. • Never use pins or other metallic fasteners with this appliance. • Carefully examine the covering before each use.
264 264 3
This equipment complies with FCC radiation exposure requirement. The device can be used in portable exposure condition without RF striction.
9 8 10 9 Pillow Pad Bluetooth Speaker Shoulder side massage section Backrest Pad Hand and arm massage section Armrest Controller Seat 8 Legrest Side Panel 10 Power Box 5
6
Air bags 10 Air bags 2 Foot rollers 4 Heat 7
Chair installation (1)Take the footrest down to the floor slowly. (2)Connect the backrest pad both sides to the chair by zipper. Connect the backrest pad and footrest cover with zipper.
1. Chair placement When placing the massage chair, be sure to leave 2 in. of space between the back of the chair and wall or any other objects to allow it recline safely. When using the massage chair, ensure there are no people, pets, or objects within 20 in. of the chair to allow the footrest extend safely. 2in. 20in.
10
Moving the massage chair Before moving the chair, please switch off the power and remove the power cord from socket. Lower the chair by the backrest until the base is inclined at a 45°angle. Move the chair carefully by the caster.
How to use Armrest Controller 1 Power 2 Sit up 4 Auto programs 5 Swing mode 6 Feet heating 3 Lay down 7 USB charging port 2/3: Sit up/Lay down Press this button to sit up or lay down. Press again to stop at the angle you like. 4. Auto programs Press this button to start auto programs. Each time you press, it will switch among 10 auto programs one by one. 5. Swing Press this button to start Swing mode. There are 3 levels for selection. Each time you press, it will switch one by one. 6.
How to use Remote Controller Power Confirm button Menu Zero gravity Pause Up/down/left/right direction button Return button Chair angle adjustment Power Same as above in page 12. Pause All massage functions will stop temporaily. Press once and the Pause icon will light up. Massage functions and timer will be stopped temporarily. Press again to resume the massage session. Direction buttons Press these direction buttons in menu could choose different options you want, and then press “OK” button to confirm.
How to use Settings Choose the functions with direction buttons and press “OK” to confirm. Language: Select the language. Screen Sleep: Adjust the Screen Sleep time. LED: Choose different LED color and mode. Time adjustment: 5/10/15/20/30 minutes. Screen brightness: Adjust screen brightness.
How to use Foot massage Choose foot massage with direction buttons and press “OK” to start. Choose different foot air massage intensity with direction buttons. When you choose the auto programs, the chair will detect your shoulder position automatically. You could adjust the massage roller higher or lower with direction buttons after you hear the “BIBI” voice. Zero gravity Reset: Massage roller, backrest and footrest will return to original position.
How to use Heating Choose heating function with direction buttons and press “OK” to confirm. Waist/Foot heating: ON/OFF the heating function. Manual programs Choose manual programs by direction buttons and press “OK” to confirm. Manual: Choose different massage style. The speed and strength could be adjusted. Region: Choose different body part for massage.
How to use Swing Choose Swing mode with direction buttons and press “OK” to confirm. Cradle mode: It is suggested using at afternoon or night. Air massage Choose Air massage with direction buttons and press “OK” to confirm. Air massage position: Choose different air massage position. Air intensity: 1-5 levels adjustment.
How to use Auto programs Choose auto programs with direction buttons and press “OK” to confirm. 9 auto programs. Position adjustment Choose position adjustment with direction buttons and press “OK” to confirm. Position adjustment: Adjust the backrest and footrest angle for better massage. Bluetooth music speaker Bluetooth music speaker: Firstly open the mobile device Bluetooth function and then match the chair Bluetooth name ”OMCXXXX”. After connection, you could display music with chair speaker.
air dryed 19
20
21
OS-3D Otamic LE 110-120V~ 150W 5/10/15/20/30 minutes Rated Time 15 minutes 62’’ x 29.5’’ x 46.5’’ 67.7’’ x 29.5’’ x 34’’ 250.8 lbs 220 lbs Length of Wire Controller wire: 32’’ Power supply wire: 70.
Issued.2020.01 V1.
