Instruction Manual Osaki Pro Maestro 2.
Contents Important safety instructions ……………………..…….......................................... 4 ………………………………………..…….................................................... 9 Before use……………………..……....................................................................................... 11 The controller instructions ……………………..……................................................. 15 ……………………..……........................................................................ 16 ……………………..……........................
Any person with a pacemaker of medical device can not use this product. The chair produces an Any one with spinal or nerve conditions u al physical discomfort during usage of the chair immediately stop using the re is abnormal discomfort after using the chair, contact your physician and refrain from using the chair unless recommended by your physician. B ons is replaceable signs of damage or tears, to avoid from damaging the roller head shock.
sounds. Do any cushions or obstructions between the backrest pad and the backrest. This may lead to damaging the mechanism and personal injury. When moving or handling the chair , be sure to grab from its frame and the recommended grabbing . When massaging the neck area, be attentive to the intensity of the massage to make sure that it is not applying to much pressure which may aggravate neck muscles or nerves.
• The following persons (even if they are physically healthy at present) should consult a physician before using the product.
Do not put hands or feet between footrest and seat base. Do not put hands or feet between footrest and side panel. Do not put hands or feet between seat base and side panel. Do not put hands or feet between upper and lower part of the footrest. Do not put hands or feet in the gap of seat base. Do not put pets on the massage chair. Do not pull out the power plug or turn OFF the power switch suddenly during massage. otherwise injuries may happen.
If the power plug is damage,it must be replaced by a special plug available from Osaki or an authorize agent .
Bluetooth Speaker Pillow OSAKI Logo Back Cushion Side Panel Controller Shoulder Controller Wireless Charge Armrest Side Panel Seat Pad Footrest LED
2 Air bags 12 Air bags 6 Air bags
Before use Make sure there is enough space to recline the chair and for the user to get in and out of the chair freely. PLEASE MAKE SURE TO USE A MAT OR RUG UNDER CHAIR IF YOU PLACED ON TOP OF A HARD SURFACE LIKE HARWOOD AND CERAMIC FLOORS. 79.5” 4.7” 25” heating equipment or by a window where sunlight can cause the synthetic leather fade, melt or crack.） 63”x31.
Do not put hands or feet between footrest and seat base. Do not put hands or feet between footrest and side panel. Do not put hands or feet between seat base and side panel. Do not put hands or feet between upper and lower part of the footrest. Do not put hands or feet in the gap of seat base. otherwise injuries may happen. Inspect the power cord of dirt or dust that may have collected. Be sure the cord is kept clean and with NO visible damage. Do not bend or twist the power cord any reason.
Be sure the power cord is firmly and completely inserted into the power outlet. 110-120 backrest in the retracted position, press "ON" button to bring back to the default position.
Inspect the synthetic leather portian in which the massaging rollers travel along the backrest. Be sure there is no damage or unusual ware. Before use, raise the back cushion and check whether fabrics lining pointeddout in the figure are undamaged. (Even if the fabric is slightly damaged,stop the product immediately,pull out the power plug and send notify the manufacturer for a replacement cover.) If the productis used when there is fabric damage, you may get in jured or get an electricshock.
The controller instructions Power switch on the top of controller ON\OFF Button Touch screen 1. Power switch on the top of controller ON /OFF button Press this button to start massage chair.Touch any massage function icon to start massage. Press this button again to turn off the massage chair, massage chair will return to its original position. 2. Touch screen： There are 7 functions in the middle of the screen for user to select. Setting is on the top left corner. Pause is on the top right corner.
Operation guide 1. Neck & Shoulder Touch this icon，the screen will change to the page [Neck & Shoulder] There are 4 auto massage programs, if 1 of 4 auto program is activated，chair will automatically perform a shoulder hight scan.The screen will that the [Shoulder scanning] is being conducted. The roller will go to shoulder adjustment automatically，user can manually adjust the shoulder hight position right after the scan is complete and just before the progam initiates. There is a 3 sec.
2. Lower back Touch this icon，the screen will change to the page [Lower back] There are 4 auto massage programs. Select 1 of 4 auto program to start the preset program. 3. Auto Touch this icon，the screen will change to the [Auto] page. There are 8 auto massage programs. Select 1 of 8 auto programs to start your preset programmed massage.
NOTE: (1) 4D Intensity: There are 8 different levels available for adjustment to suit various massage strength. In Auto programes, users can adjust 4D intensity instead of Strength and Speed. Strength and Speed will be locked for better massage experience. (2) Air Intensity ： There are 5 different levels available for adjustment. After switching to other pages, click the name of the top massage program to return to the adjustment interface. 4.
NOTE: (1) 4D Intensity: There are 8 different levels for the 4D intensity. In massage mode, the intensity will set to default. (2) Intensity / strength / speed: There are 5 different levels for adjustment. (3) Upward / downward: When pressing the [Spot] button, it will freeze the massage rollers from moving up or down, concentrating the massage at that point. In order to change the spot location simply press the up or down icon.
NOTE: Heating: The heated rollers will automatic activate in the auto program.Touch this icon to turn off the roller heat. Touch again to activate it. Fast pump: To dispaly the various airbag massage program on the arms and waist select the [air massage] to select the region and intensity. Calf kneading: When selecting [calf] you can control the speed of the kneading. Foot kneading: The footrest is equipped to knead (rollers) and compress(mechanical). 6.
Control Buttons on the side panel USB mobile phone charger Power: ON /OFF button Z-G: A key to start Zero gravity position AUTO Z-G 4D 4D Auto: A key to start demo auto program Pause: Massage function pause/start button 4D +/- : 4D Intensity adjustment
After massage Turn off the power switch on the controller. Pull the power switch to “O” position. Pull out the power plug. After using, it is recommended to put the power switch to the OFF position and pull out the power plug; otherwise accidents and injuries by playing with them by children may happen.
Do not clean the product with solutions containing chemicals such as thinners, gasonline and alcohol. Be sure that leather cleaner will not harm the synthetic leather by reading the label. Wet a soft cloth into water or 3% to 5% neutral detergent containing hot water and wring it out. Be sure the soft cloth is well wrung out till there is NO water dripping from the cloth. Wipe surface of the synthetic leather with the soft cloth. Be sure to rinse out the cloth multiple times when wiping down.
Can someone with a medical condition or disease use this product? They must consult with their physicians before using the product. Massage can aggravate or worsen muscle injuries, bone disease, spinal abnormalities, skin disease and kill ones with medical devices implanted in their body. It is located at behind the backrest at the back of the chair by the power cord. Is there a restriction body height and weight to use this chair? The recommended min. Height is 4’9” with a max. height of 6’4”. The max.
If an issue occurs, inspect and trouble shoot according to the corresponding method below. If the problem is not resolved, contact the manufacturer for further instructions or service. As a safety protocol the massage heads will stop if pressure/weight load has exceeded its limit. To avoid potentially over heating or damaging the massage mechanism the chair is designed to automatically shut off if over strained or over heated. The remote will flash a few times and then shut off as a safety measure.
Expected sounds and feelings when using the massage chair. You will hear or have the following feelings when using the product. These not defective indicators but a normal function of the chair. When chair extends or retracts you will hear gears moving an clicking. A rubbing sound will be mildly heard when the massage heads are activated. When the massage heads are tapping you may hear a mild clicking sound. Friction sounds will be experienced as the rollers are activated.
Model Osaki Pro Maestro 2.0 Rate Voltage 110 -120V 60Hz Power 250W Working time 15min Guide L Shape 52.8" 4D Massage Roller Forward distance 8 level Approx 3.9" Strength 5 level Speed 5 level Airbag Intensity 5 level Angle Adjustment Backrest Approx 128°- 155° (Ground Angle) Footrest Approx 9°- 75° （Wall Angle） Upright 61.1"x31.9"x48.1" Reclined 79.5"x31.9"x46.9" size Extension of Footrest Dimensions of Packing （L*W*H） Approx 7.1" BOX1：57.9"x30.0"x40.2" BOX2：41.8"x13.8"x29.
