OS- Escape 4D Massage Chair OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS ※Products refer to the actual product, without prior notice.
Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product.
Important Safety Instruction Important Safety Instruction When using an electrical appliance, basic precautions should 14) Connect this appliance to a properly grounded outlet only ,see grounding always be followed, including the following: Read all instructions before using (this appliance) DANGER-To reduce the risk of electric shock: instructions . 15)Keep children away from extended foot support (or other similar parts 16)Do not use massager in close proximity to loose clothing or jewelry.
Instructions De Securite Importantes Securite Et Entretien lors de l'utilisation d'un appareil électrique, des précautions de bases doivent être respectées, y compris ce qui suit : Lisez toutes les instructions avant d'utiliser l'appareil. 15) Éloignez les enfants du support de pied ouvert (ou des autres pièces semblables). 16) Ne pas utiliser de massage à proximité des vêtements amples ou des bijoux. 17) Garder les cheveux longs à l'écart de masseur en cours d'utilisation.
Use safety warning Use safety warning Warning Warning ·When the footrest lifting, people should not apply pressure on the footrest to avoid the massage chair falling forward to damage the product or cause personal injuries ·Do not strive to pull out the control cable or power cord during standby or poweronstate to avoid product damaged or electrocution accidents. Advise you unplug the controller cable and power cord and put away after you use the chair.
Name and function of components Function 1 2 3 4 5 6 7 8 9 14 15 16 10 17 ·This product is designed with a set of intelligent 4D massage hand that can walk up and down, front and rear telescopic, and silent design ·The design has automatic detection and micro-adjustment function of the shoulder position; the human body curve and the automatic detection function of the massage finger pressure point automatically adjust the amount of the front and rear movement of the manipulator according to the detect
Function Remote interface introduce ·The foot is equipped with a foot roller massage function. The two sets of rollers roll and scrape the foot and the foot, and the heel has a number of massage bumps to massage the heel. ·The calf is equipped with the function of automatically detecting the length of the foot. When the calf is raised or lowered to a suitable angle, the calf will detect the length of the foot and detect the most comfortable massage part.
Method of usage ·When you select any of the automatic modes, the backrest and calf position will be adjusted to the set angle. ·After adjusting the angle, the massage chair automatically performs the shoulder position and body shape detection (Note: Shujing Active only detects the shoulder position, other modes are full body type detection and shoulder position detection), waiting for the test to be completed.
Remote interface introduce Method of usage Controller button section 1.Switch power supply on Diagram of plug in Diagram of the switch position of power supply Diagram of line 2 1 CO CO NTR NTR OLL ER OLL ER JAC K JAC K 3 4 FUSE : T5AL FUSE : T5AL 250V POW ER ER T 5 250V POW INPU INPU T 6 2.Second, the hand control massage function control operation 7 8 11 9 12 10 13 14 18 15 19 16 17 1.Pause button: Pause the current function. 2.
Method of usage Method of usage Main menu Main menu Automatic program Manual mode Featured massage Adjustment Manual mode customize Adjustment Setting customize Device Information 5).
Method of usage Method of usage 01).Automatic function (featured massage) 6).Manual ( Manual button- also can press” Manual” to directly enter manual mode surface) ·Press “Menu” to enter the main menu interface and select the manual mode icon: including massage technique, massage part, air pressure, and other massage functions.
Method of usage Method of usage 01).Manual Mode ( Manual button-mode) ·Manual mode (manipulation): including six different massage techniques such as stopping, kneading, tapping, kneading, finger pressing, 4D, and shoulder lifting. In the state of tapping and finger pressing, the width of the massage ball can be adjusted. ·Press “Up” or “Down” to select the function function icon, press “Enter” to confirm the selected massage method.
Method of usage Method of usage ·Manual mode (other - sole roller) ·Manual mode (other - star top) ·Select to turn the foot roller massage function on or off by pressing the "Enter" button. ·Press “Up” or “Down” to select other massage functions, press “Back” to return to the running status information interface. ·Select to turn the star top function on or off by pressing the "Confirm" button.
Method of usage Method of usage 03).Manual mode (manual button - air pressure) 04).Manual mode (manual button - Others) ·Manual mode (air pressure): including arm pressure, buttock pressure, leg pressure, and full air pressure massage. ·Press “Up” or “Down” to select different air pressure massage functions, press “Enter” to confirm. ·Manual mode (others): including massage, foot roller, aromatherapy, star top and other massage functions.
Method of usage Method of usage Adjustment Adjustment Adjustment Massage Area Intensity Others Arms air 02).Adjustment function (adjustment button - massage area) ·Adjustment function (massage area): In the state of fixed point or partial massage area, press and hold the "up button" to release the massage robot and walk up, stop and stop; press and hold the "down button" to release the massage robot down Walk, release and stop. ·Press the “Up” or “Down” button to adjust the massage area.
Method of usage Method of usage 01).Settings (language) ·Settings (Language): Sets both Chinese and English. ·Press “Up” or “Down” to select the language type and press “Enter” to confirm. Setting Setting Language Language English English China China 10). Device information ·Press “Menu” to enter the main menu interface and select the device information function to display the current device information. ·Press “Up” or “Down” to select and press “Enter” to confirm.
Method of usage Method of usage 04).Adjustment function (adjustment button - other adjustments) ·Adjustment function (other adjustments), currently only Adjustment timing. Each time you press the “Confirm” button, it will be superimposed in 5 minutes. If it is more than 40 Others minutes, it will be subtracted by 40 minutes.
Method of usage Method of usage 12). Heat button 14).Lying angle adjustment button ·Press the “heating button” to turn on or off the back and calf hyperthermia function at the same time; after the thermotherapy function is turned on, the information interface displays the heating icon, and the heating is the far infrared hyperthermia function, which is warm after 3 minutes.
Method of usage Method of usage Star Top button: Turns the star blue top physiotherapy function on or off. Zero gravity button: Each time the button is pressed, the position of the calf frame and the back frame is automatically adjusted to the zero gravity position. there are two zero-gravity lying modes, which are cyclically switched. 4.
Method of usage Method of usage 2). Bluetooth connection 6.Sixth, tablet computer massage function control operation ·Turn on the power switch of the massage chair and automatically turn on the Bluetooth function. ·From the tablet home screen, open the application list and select Settings to open the settings screen.
Method of usage Method of usage 01). Shoulder position adjustment ·Automatically perform human shoulder position and massage finger pressure point detection, waiting for the test to be completed. ·After the test is completed, enter the shoulder massage position adjustment interface and make a “DiDi...” prompt tone. If it differs from the actual shoulder position, you can adjust it to the appropriate position by pressing the “Up” or “Down” button. The shoulder position is adjustable in 11 steps.
Method of usage Function Activating collaterals Method of usage Description Activating collaterals massage function is mainly used to massage the neck, shoulder, back, waist, buttocks, etc. by means of massage, finger pressure, squatting and tapping; and combined with the foot roller and the leg airbag squeeze type, The body is fully massaged. Effectively promote the body's meridians, eliminate fatigue, promote blood circulation, improve the body's immunity, relieve muscle fatigue and soreness.
Method of usage Method of usage Note: Massage intensity: 4D massage intensity, that is, the robot is extended forward or the whole is retracted. The intensity of the massage is adjusted in the intensity of a certain massage area, not the strength of the full back. Boot detection full body type, the intensity of each massage point has been tested, if you feel the intensity of a certain massage point needs to be adjusted, adjust with this button.
Method of usage Method of usage 4). Other functional massage 01).Other functional massage - hyperthermia function 03).Other functions massage - star top function ·Click the “ ” button icon to enter other massage function selection interface. Click “ ” icon to turn on or off the back and leg hyperthermia function at the same time. The hyperthermia is the far infrared heating and heat treatment function.
Method of usage Method of usage 05).Other functions massage - smart archive function Linking up button: Press and hold this button, the backrest frame will rise slowly, while the calf frame will slowly descend. When released, the backrest frame will be raised or the lower legrest will be lowered. After the joint kicking action is completed, the calf will automatically detect the length of the foot.
Method of usage Method of usage 8.Eight, handrail installation instructions ·Find the connecting plug corresponding to the armrest from the bottom of the frame and pierce it from the middle of the armrest steel frame (Figure 1). ·After inserting the connecting plug from the middle of the armrest steel frame, corresponding to each pair of wiring plugs (Figure 2).
Method of usage Method of usage 9.Nine, calf installation instructions 5. Then hang the lower leg (left and right shaft) into the frame support hinge plate (Figure 5). 6. Cover the rotating shaft cover, press the calf to rotate the outer sleeve, and then use the 4# hex wrench provided to tighten 2 M5×14-12.9 black zinc environmental protection hexagon socket head cap screws and a 6×12× 1.5 Black zinc environmental protection flat pad locks the calf support rotating cover and the calf is installed (Fig.
Method of usage Method of usage 10.Ten, aromatherapy installation instructions 11.Head cushion and backrest pad's dismounting and use manual ·Rotate the capsule cover to the back of the massage chair. You can see the aromatherapy device on the right side of the massage chair (Figure 1). ·Rotate the aromatherapy holder knob to the unlock position and remove the empty aroma stick (Figure 2).
Method of usage Product specification 13.Method of movement Model: OS- Escape 4D Name: Massage Chair Rated voltage: 110-120V~ 60Hz 220-240V~ 50Hz/60Hz Rated power input:260W Rated time: 20Min Safety structure: Class I ·When moving, first make sure all the wires are pulled out of the massage chair. On the left and right sides of the massage chair, hold the lower edge of the armrest with both hands, and then lift the massage chair upwards with force.
