Material Safety Data Sheets

Rear clearance

Notes

Allow for at least 31.5” rear clearance behind and the

chair and 13.8” in font of the chair when installing.

Caution

1.Place a carpet under the chair to protect the floor and install on a flat even

surface only.

2.Be careful not to damage the floor surfaces when positioning the chair.

3.Do not install the chair in an area of high humidity such as a bathroom or

sauna, or where the ambient temperature is 104 ℉ or higher.

4.Install the chair at least 3 feet away from TVs,radios, and/or other audio or

video equipment to prevent signal interference

Accesscories

2* M6*40mm

2* M6 washer

2* M6 spring washer

31.5ȕ

13.8ȕ

Installation of the backrest unit

Lift the backrest, then lower the backrest into the seat brackets. Securely lock

the flat head bolts into both sides of holder on the seat.

Note: Please do it carefully to avoid scratching during installation.

A: Flat Head bolt (on the backrest)

B: Holder (On the seat)

Step 1: