User Manual
8
Standard accessories
Glow Plug LC3
Exhaust Seal Ring 1piece
ABOUT THE ENGINE
Exhaust Manifold for Revo
Items necessary for starting
Tools,  accessories,  etc.The  following  items  are 
necessary for operating the engine.
BEFORE STARTING
FUEL
Generally, it is suggested that the user selects a fuel 
that is commercially available for model two-stroke 
engines and contains 10-30% nitromethane. As  a 
starting point, we recommend a fuel containing 20% 
nitromethane,  changing  to  a  fuel  containing  more 
nitro  if  necessary.  When  the  brand  of  fuel  is 
changed,  or  the  nitro  content  increased,  it  is 
advisable  to  repeat  the  running-in  procedure 
referred to in the RUNNING-IN paragraphs. Please 
note  that  with  high-nitro  fuels, 
although power may be increased 
for  competition  purposes, 
glowplug elements do not last as 
long  and  engine  life  will  be 
shortened. 
T-Maxx and Revo are trademarks of Traxxas Corp.
Exhaust Manifold for T-Maxx
These  engines  are  designed  especially  to  power 
the  T-Maxx  or  Revo.  Purposely designed  LC3 
glow  plug  is  supplied  with  the  engine  for 
improved  power, fuel economy and  durability.   
The carburetor offers  easy handling as well as 
high performance.
9
! 
! 
Model engine fuel is poisonous. Do 
not  allow  it  to  come  into  contact  with 
the eyes or mouth. Always store it in a 
clearly marked container and out of 
the reach of children.
Model  engine  fuel  is  also  highly 
flammable.  Keep  it  away  from  open 
flame,  excessive  heat,  sources  of 
sparks, or  anything else which  might 
ignite it. Do not smoke or allow anyone 
else to smoke, near to it. 
FUEL FILTER
GLOWPLUG IGNITER
Commercialy  available  handy 
glowplug  heater  in  which  the 
glowplug  battery  and  battery 
leads are integrated. 
To be installed in the fuel line 
between fuel tank and carburetor 
to  prevent  foreign  matter  from 
entering the carburetor.
FUEL PUMP
For filling  the  fuel  tank,  a  simple, 
polyethylene  "squeeze"  bottle, 
with a suitable spout, is required. 
SILICONE FUEL LINE
Heatproof  silicone  tubing  of 
approx.  5mm  o.d.  and  2mm  i.d. 
is  required  for the connection 
between  the  fuel  tank  and 
engine.










