Prog_Card_Manual_V1.0

5 Page 5. Assignment Flight Modes to channels.
ARM – Channel to set for ESC arming. If chosen «--» arming will be performed by rudder stick moved left
when the throttle is in lowest position. To disarm the motor with you will need to bring the throttle
down and move the rudder stick right.
Beginner – Channel and its position to activate Beginner mode
Advanced – Channel and its position to activate Advanced mode
Please note, if Beginner or Advanced modes are not active, then Rates(Pro) mode is selected by default.
In this mode the aircraft will be stabilized from wind disturbance but the self-leveling functionality will
be disabled.
Pass Thru – If this mode is active the stabilizer is disabled completely, It will pass all the controls from
your transmitter to the aircraft servos. It is a useful mode for experienced pilots to fine tune the aircraft.
Available channels to assign : "AUX1 low", "AUX1 mid", "AUX1 high", "AUX2 low", "AUX2 mid", "AUX2
high", "AUX3 low", "AUX3 mid", "AUX3 high", "AUX4 low", "AUX4 mid", "AUX4 high", "always ON"
“Always ON” option makes the selected feature always enabled regardless of any channel state.
6 Page 6.Model type and throttle settings.
Mdl type – you can chose appropriate type of your model for servo mixing. Available options:
"F-Wing", "Classic", "V-Tail"