Smart Door Lock User Manual S2 Special Attention: 1. Mechanical keys please keep outdoor, just in case keys lock in doors. 2. Please replace for the battery when low wattage alarm. 3.Reading this manual carefully before installation, and keep it for future reference.
1. Introduction 1.1.Lock structure Introduction Installation Operation 1.2.Packing List Check the following drawing to check whether the package contains all the parts F&Q Name Qty NO. 1 Front Panel 1 9 M5*30mm Screw Stub 2 2 Back Panel 1 10 M5*35mm Screw Stub 2 3 Mortise 1 11 M5*30mm Screw 2 4 Card 3 12 M5*40mm Screw 2 5 Mechanical Key 2 13 Sliding Screws:M5*11mm 2 6 User Manual 1 14 7 57MM Square Shaft 1 15 8 67MM Square Shaft 1 16 1 Name Qty NO.
1.3.Specifications Suitable for S2 Models Doors Applicable Handle：SS304 Materials Working Voltage Panel：SS304 Door Thickness 2KG Unlocking Way Bluetooth Fingerprint(option) Password Card Mechanical key Gateway(option) Data Capacity Silver Working Black Temperature Alarm 35-60mm Fingerprint：200 Password：150 Card：200 Working Less than 4.
2.Installation 2.1Turn the handle Notice: Adjust the handle according to the direction you open the door. For Front Panel: Introduction Installation Operation 1.Turn the handle on the front 2.Remove the handle 3.After adjusting the direction of panel loosen the screws on the the handle insert it into the handle handle counterclockwise seat and re-lock the screw of the handle to the complete the turning For Back Panel: F&Q 1.Turn the handle on the front screws panel on loosen the 2.
2.2. Installation Diagram(For 3585) Step 1 Install Mortise Insert the screw into the hole and fix it Introduction 1.Choose a screw column suitable for the thickness 2.Install waterproof in alignment with the holes 3.
Step 4 Install Back Panel Install another waterproof pad to the rear panel Introduction Installation Step 5 Connect Front and Back Panels Wires Operation 1.Fix the front and back panels with screws suitable for the thickness of the door 2.Connect the front power cord to the back panel F&Q Step 6 Install the Battery 1.Install 4* AA batteries 2.
3.Operation 3.1.Registration The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play. 3.2. Connect lock to the phone 1) please scan the QR code to download the app 3) Register a new account (phone number or email) or login with an existing account.
3.4.User Management 3.4.1. Bluetooth management Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click " "to unlock.(the phone is within 5meters from the door lock) 3.4.2. Setting Passcode Introduction Passcodes are also a way to unlock. After entering the passcode on the locked keyboard, press the unlock button in the lower right corner to unlock. Passcodes are divided into permanent, time-limited, single, clear, cycle, and custom.
3.4.4.Add card Supports opening doors through various IC cards. Before an IC card is used to open the door, it needs to be added first. The adding process needs to b e performed by the app beside the lock.The validity period of the IC can be set, it can be permanent, or it can be limited in time. Introduction 3.4.5. Add fingerprint Installation The premise that a fingerprint can be used to open a door is that it needs to be added first.
3.5. Gateway management(Optional) The TT lock is directly connected via Bluetooth, that is why it is not attacked by the network. The gateway is a bridge between smart locks and home WIFI networks. Through the gateway, the user can remotely view and calibrate the lock clock, read the unlock record. Meanwhile, it can remotely delete and modify the password. 3.5.1. Add Gateway Introduction Installation Operation F&Q 3.5.2.
4.FAQ 1) How to read operation records? 2) Why can’t I unlock it after open the passage mode In the Records of the main interface. . You need to perform an unlock verification in any method, then the passage mode will take effect. You can set how long to lock after unlocking a) In this case, first check that the positive and negative electrodes of the battery have been installed upside down, whether the battery has enough power.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Guarantee Customer Name： Customer Calls ： Purchase Date ： Product Name ： Product Model ： Note: ① Please keep this card so that you can use it when you need warranty service. ② We provide you with a one-year warranty from the date of purchase. ③ This warranty service is valid for customers in any country in the world.
