Cut Sheet

PEP ecopassport No LGRP-00053-V01.01-EN Page 3 / 5
Legrand North America
Data Communications Division
125 Eugene O’Neill Drive
New London, CT 06320
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile
Wall Mount Racking Systems
Manufacturing Packaging taken into account up to first level packaging. As required by the PEP ecopassport program, all transport
for the manufacturing of the Reference Product, including materials and components, has been taken into account.
The waste generated during manufacturing phase has been taken into account.
Distribution Transport between the last distribution center and an average delivery to the sales area.
Installation The end of life of the packaging (3 lbs or 1.3 kg) is taken into account at this phase. Transport of packaging to end of
life treatment.
Use • Under normal conditions of use, this type of product requires no servicing or maintenance.
• No consumables are necessary to use this type of product.
• Use scenario: no energy consumption during the 20 year working life. This modelling duration does not constitute a
minimum durability requirement.
• Energy model: Electricity(US) - 2009
End of life The default end of life scenario modelled maximizes the environmental impact.
Software used EIME V5 and its database “CODDE-2015-04” and the indicators defined in the PCR ed 3 in alignment with the EN15804
standard
ENVIRONMENTAL IMPACTS
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution,
installation, use, and end of life. It is representative of products marketed and used in North America.
The following modelling elements were taken into account:
USE
Servicing and maintenance:
Under normal conditions of use, this type of product requires no servicing or maintenance.
Consumable:
No consumables are necessary to use this type of product.
END OF LIFE
Hazardous waste
*
contained in the product: no hazardous waste
(
*
) Hazardous waste as defined by European Commission decision 2000/532/EC.
• Recycling rate:
Calculated using the method described in the IEC/TR 62635 technical report, the recyclability rate of the product is estimated as 100%.
This value is based on data collected from a technological channel using industrial procedures. It does not pre-validate the effective use
of this channel for end-of-life electrical and electronic products.
Separated into: (% mass of Reference Product without packaging)
- plastic materials (excluding packaging): <1%
- metal materials (excluding packaging): 100%
- other materials (excluding packaging) : <1%
Recycling rate of packaging (all types of materials): 99% (% mass of packaging)