Datasheet

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895
169
PATCH CORDS
Pre-Terminated Momentum
®
Backbone Cables
Note: replace xxx with length in feet or meters (refer to F or M part number).
Momentum Backbone cables can also be ordered in 62.5/125 and standard 50/125
optical fiber for legacy and low data rate applications. Please contact your Ortronics
sales representative for assistance.
PART NO. DESCRIPTION
OR-TOBPIAFCZIIxxxM
Plenum, single-mode, OS2, no pins,
12-fibers, yellow, meters
OR-TOBPIAFCZIIxxxF
Plenum, single-mode, OS2, no pins,
12-fibers, yellow, feet
OR-TOBLIAFCZIIxxxM
LSZH, single-mode, OS2, no pins,
12-fibers, yellow, meters
OR-TOBLIAFCZIIxxxF
LSZH, single-mode, OS2, no pins,
12-fibers, yellow, feet
PART NO. DESCRIPTION
63900071-001
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-B, 50 LOMF, 2m
63900071-002
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-B, 50 LOMF, staggered, 3m
63900071-003
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-B, 50 LOMF, staggered, 4m
63900071-004
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-A, 50 LOMF, 2m
63900071-005
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-A, 50 LOMF, staggered, 3m
63900071-006
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-A, 50 LOMF, staggered, 4m
Pre-Terminated MTP To MTP Single-Mode Momentum Backbone Cables
Harness
Ortronics
®
harnesses are used to
break out the MPO-fitted trunk
cable into LC duplex connectors
to plug directly into the active
device. Each harness has a
12-fiber MTP*/MPO pinned (male)
connector on one end and 6
duplex LC furcation tubes on the
other. Each leg of the LC end can
be either identical in length, or
each leg can be staggered 30mm
(1.18˝) longer than the tube
before it; another way to minimize
and manage excess cable slack.
* MTP is a registered trademark of
UC Conec.