User manual

Tonearm level, vertical tracking angle
Cartridges are constructed so that cantilever angle corresponds to the 20 deg. record cutting
angle, when the cartridge is loaded with recommended tracking force and the cartridge base is
parallel with the tonearm and this again is parallel to the record surface.
Connection to amplifier
For amplifiers only having MM-input sockets, we recommend one of the Ortofon transformers
to be applied.
Antiskating
For the Quintet stylus types set normal antiskating, according to recommended tracking force.
Stylus Protection Guard
The stylus guard provided for Quintet Series cartridges is designed to be easily replaced and
removed. To avoid accidental damage to the stylus or cantilever please mount the enclosed
stylus guard onto the cartridge whenever the cartridge is not in use. A new stylus protection
guard can be purchased on the Ortofon webshop www.ortofon.com.
Please note
To avoid damages on the stylus or cantilever please keep the stylus guard on the cartridge any
time when mounting or dismounting the unit.
Stylus care
Ortofon does not recommend the use of solvents of any kind for cleaning of either the record
surface or stylus. If necessary, records may be washed in lukewarm demineralized water with
a dash of sulphonic soap. Remove dust carefully from record surfaces by using a fine antistatic
brush or cloth before every use. The use of solvents on the stylus and cantilever may damage
stylus cement; interior parts of the cartridge can be affected seriously by the intrusion of solvents.
The Ortofon warranty will not be valid in cases where such treatment has caused malfunction.
For cleaning the stylus, use the enclosed fiber brush a few times along the cantilever in the
direction of the stylus, whenever you play a new record or change sides. Record care should
also be performed regularly and is of paramount importance to prolong the life and condition of
the stylus. Because of this, a record cleaning machine may be considered for ease and quality
of record cleaning.
Ortofon exchange service
Owing to the design of the Ortofon moving coil cartridge, the stylus is not part of a replaceable
assembly and therefore Ortofon offers an exchange service. If you should have the need for this
service, please contact your local Ortofon partner.
10
11