Instructions

Output voltage at 1 kHz 5 cm/sec 450 µV 450 µV 500 µV 400 µV 330 µV
Channel balance < 1,5 dB < 1,2 dB < 1 dB < 0,8 dB
Channel separation at 1 kHz > 23 dB > 23 dB > 24 dB > 27 dB
Channel separation at 15 kHz > 15 dB > 15 dB > 20 dB > 20 dB
Frequency response 20 Hz - 20 kHz +3/-1 +3/-1 +2/-1 ±1,5 +1,5/0
Tracking ability at 315 Hz at
recommended tracking force *)
70 µm 80 µm 80 µm 80 µm 90 µm
Compliance, dynamic, lateral 12 µm/mN 12 µm/mN 12 µm/mN 12 µm/mN 16 µm/mN
Stylus type
Nude fine line Nude fine line Nude FG 70 N
ude Ortofon Replicant Nude Shibata
Al. cantilever Al. cantilever Ruby cantilever Conical alu.
Boron cantilever
Stylus tip radius r/R 8/40 r/R 8/40 r/R 6/70 r/R 5/100 r/R 6/50
Tracking force range 2,2-2,7 g (22-27 mN) 2,2-2,7 g (22-27 mN) 2,2-2,7 g (22-27 mN) 2,2-2,7 g (22-27 mN) 2,0-2,5 g (20-25 mN)
Tracking force recommended 2,5 g (25 mN) 2,5 g (25 mN) 2,5 g (25 mN) 2,5 g (25 mN) 2,3 g ( 23 mN)
Tracking angle 20º 20º 20º 23º 20º
Internal impedance, DC resistance 5 Ohm 5 Ohm 5 Ohm 5 Ohm 5 O
hm
Recommended load impedance 50-500 Ohm 50-500 Ohm 50-200 Ohm 50-200 Ohm >10 Ohm
Cartridge body material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Aluminium Aluminium Aluminium Aluminium Aluminium
Cartridge colour Natural/Black Red/Black Blue/Black Bronze/Black Black/Black
Cartridge weight 10,7 g 10,7 g 10,7 g 10,7 g 10,7 g
*) Typical value
Technical Data
Mono Red Blue Bronze Black