Users Manual

5 | iASSIST 2-Pod Version Surgical Technique

2.2 Application Launch and Patient

Side Selection

1. Press the green iASSIST icon displayed on the

iASSIST V2 Tablet home screen. The barcode

scanner window will open and the barcode

scanner will start automatically and stay active for

30 seconds.

2. Place the barcode in the barcode scanner eld

of view. Press on the “Scan” button to restart the

scanner if needed.

Note: If the 2D barcode cannot be read, the

barcode can be entered manually by pressing

the “Manual Entry” button on the screen.

Warning: After having scanned the barcode

and powered on the Pods, do not exit the

application unless the surgical procedure

has ended. When exiting the application, the

Pods will be permanently deactivated. Once

deactivated, the Pods cannot be restarted.

Figure 2.2

Application Launch

3. If desired, enter a patient ID and press on the

continue button. The application will launch and

the Tablet will emit a conrmation sound.

4. The Setup window will be displayed. Select the

operative side and adjust the target angles for the

procedure. Click save to continue.

Note: If the wrong patient side is selected at

the beginning of the surgery, the “Settings”

button will be accessible once the Pods have

joined the network. It will then be possible to

change the patient side.

Warning: Ensure to enter a de-identied

patient ID so that the patient cannot be

identied from the data.