Users Manual
13 | iASSIST 2-Pod Version Surgical Technique
3.4 Femur Procedure
The iASSIST Knee system is compatible with Femur rst
and Tibia rst procedure. See the “Tibia Procedure”
section to start with the tibia.
3.4.1 Workow Selection for Femur
To Start a femur rst procedure:
1. Clip the “Reference” Pod to the Femoral Reference.
2. Identify the femur mechanical axis entry point.
3. Impact the Femoral Spike into the distal femur
mechanical axis entry point, aiming at the
femoral head. Ensure that the star-shaped end
is well inserted and stable into the bone.
Warning: The spike should be aligned within
15° of the mechanical axis of the femur.
This alignment is required because of the
mechanical adjustment limit of the Femoral
Adjustment Mechanism.
Figure 3.4.1
Workow Selection