Users Manual

8 | iASSIST 2-Pod Version Surgical Technique
3.1 Instrument Assembly
3.1.1 Femur Instrument Assembly
1. Insert the Femoral Saw Slot into the Femoral
Distal Cut Guide and tighten it at the “0”
position with a 3.5 mm hex head screwdriver.
Note: The Femoral Saw Slot, when secured
at the “0” position on the Femoral Distal Cut
Guide, resects 10 mm o the most distal
condyle.
2. Assemble the Femoral A/P Slider to the Femoral
Distal Cut Guide by tightening the blue screw.
Note: Specic A/P slider and distal femoral
Cut Guide are also available to t high BMI
patients. Refer to part numbers:.
20-8011-027-50 HBMI Distal Femoral Cut Guide
20-8011-028-50 HBMI Femoral A/P Slider
Figure 3.1.1
Femur Instrument Assembly
3. Intraoperative Guide
Note: Through this surgical technique, images from a
left knee procedure are shown.