Cleaning Instructions
66 | iASSIST 2-Pod Version Surgical Technique
Warning: The iASSIST V2 Tablet has been tested and is in compliance with the EMC (Electro-Magnetic Compatibility)
requirements for emissions. In some situations it is still possible that radiated electromagnetic elds such as those
from portable and mobile devices may cause performance degradation. Portable and mobile RF communications
equipment can aect the iASSIST Knee System. Turning o 2.4GHz band Radio Frequency (RF) devices around the
system (such as Bluetooth, Wi-Fi) can improve communication performance between the Pods and the iASSIST Tablet.
Wireless Communications
The iASSIST V2 Tablet (20-8011-070-19) contains IEEE 802.15.4 RF transmitter with the following characteristics:
- Transmission frequency: 2.405 GHz to 2.48 GHz
- Modulation: Oset Quadrature Phase-Shift Keying (OQPSK)
- Coding: Direct Sequence Spread Spectrum (DSSS)
- Transmission bandwidth: 2 MHz
- Eective isotropic radiated power: 4 dBm
The iASSIST V2 Tablet contains IEEE 802.11 RF transmitter with the following characteristics:
• Transmission frequency: 2.4 and 5 GHz
• Network Standard: Compliant with IEEE 802.11a/b/g/n/ac
• Modulation: OFDM with BPSK, QPSK, 16 QAM, 64 QAM;DQPSK, CCK, G-FSK, π/4-DQPSK, 8-DPSK
• Eective isotropic radiated power: 19.06 dBm
• Transmission bandwidth: Depends on network standard
Warning: If the iASSIST V2 Tablet is not used for a long time, ensure the Tablet is recharged periodically.
Warning: Operation in the band 5150–5250 MHz is only allowed for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems
Avertissement: Operation dans la bande 5150-5250 MHz est autorisée uniquement pour un usage intérieur
an de réduire les risques d’interférence nuisible aux systèmes mobiles par satellite co-canal
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected; and
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution: Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.