Assembly Instructions

45 | iASSIST 2-Pod Version Surgical Technique
4. Postoperative Guide
4.1.1 Connection by Wi-Fi
In order to connect the system via Wi-Fi:
1. From the home menu, ensure the Wi-Fi is activated
on the tablet (see gure 4.1 for explanations on
the network status). If not, press on the “P2”
button on the top left side of the iASSIST V2 Tablet.
2. Click on the Network button.
3. Select an available network. If needed, enter
appropriate credentials for the chosen network,
then click on the “Connect” button.
Warning: It is strongly recommended to protect
against malicious unauthorized use by ensuring
that the iASSIST V2 Tablet is never left unattended
while powered on. Only Zimmer Biomet
Representatives are authorized to update the
system with approved software. Zimmer Biomet
takes no responsibility for malicious activity that
may result from lack of current, appropriate IT
security practices.
4.1 Connection to the internet
Although it is not necessary to perform an iASSIST
case, the iASSIST V2 Tablet can be connected to the
Internet either by Ethernet cable or by Wi-Fi. This
connection can be used, for example, to download
system upgrades.
Note: The Internet connection will be deactivated
while the iASSIST application is open.
4.1.1 Connection by Ethernet Cable
1. Open the hatch on the left side of the iASSIST V2
Tablet (See gure 2.1) to connect the Ethernet
adapter (which is included in the iASSIST V2 Tablet
Shipping Case) to one of the two USB slots.
2. Connect the Ethernet adapter to the Tablet and to
the local Ethernet cable.
Figure 4.1
Internet Connection
All the operations described in this section must be
performed from the Tablet home screen.
1) The iASSIST V2 Tablet is not connected to the
Internet or the Internet is deactivated
2) The iASSIST V2 Tablet is trying to connect to
the Wi-Fi
3) The iASSIST V2 Tablet is connected to the
Internet via Wi-Fi
4) The iASSIST V2 Tablet is connected to the
Internet via Ethernet cable