User's Guide

06/2019 LB-5200 Rev. 2
8
VERASENSE OrthoSensor.com
POWERING ON THE LinkStation MINI
GETTING STARTED
LINKSTATION MINI
LINKSTATION MINI
EVALUATION KIT
Turn OFF
Devices
Please activate sensor by placing it on the magnet
(Keep sensor on the magnet until application starts)
Searching for sensors...
Physician Name
Select
DISPLAY UNIT POWER BUTTON
AC/DC POWER INDICATOR
RED = UNPLUGGED (DC)
GREEN = PLUGGED IN (AC)
STEP 1
To turn on the LinkStation MINI or LinkStation MINI Evaluation Kit, press
the power button located on the left side of the Display Unit.
STEP 2
The VERASENSE Software Application for Shoulder will automatically
startup once the Display Unit is powered on.
STEP 3
The plug-shaped AC/DC Power indicator on the bottom left of the screen
will show whether the tablet is plugged in and running on AC power or if
it is unplugged and running on DC battery power.
CAUTION It is recommended to always plug in the Display Unit and
operate the system on AC power.
NOTE
Place the LinkStation MINI or LinkStation MINI Evaluation Kit on
contralateral side of the operating table for optimal surgeon visibility.