User's Guide

06/2019 LB-5200 Rev. 2

VERASENSE OrthoSensor.com

WIFI CONNECTION SETUP

The WIFI Button in the lower left-hand corner will indicate the

connection status of the VERASENSE Software Application

for Shoulder:

GREEN = WIFI Connected

RED = WIFI Not Connected

STEP 1

Select the WIFI button to connect the VERASENSE Software

Application for Shoulder to a wireless network or to

acknowledge a network access policy for a connected

(green) network.

• On the WIFI Network Conﬁguration Screen, a list will

populate with the names of all available networks.

STEP 2

Use the UP and DOWN arrows to scroll through the list of

available networks.

NOTE: If desired network is not shown, please select the

RE-SCAN button to repopulate the network list.

STEP 3

Select the desired WIFI network by touching the appropriate

network box.

POWER

Please activate sensor by placing it on the magnet

(Keep sensor on the magnet until application starts)

Searching for sensors...

Physician Name

Surgeon Not Listed

WIFI

KEYBOARD

RE-SCAN