User's Guide

06/2019 LB-5200 Rev. 2

VERASENSE OrthoSensor.com

TROUBLESHOOTING

VERASENSE

If VERASENSE for Exactech Equinoxe light does not turn off

during activation:

• Return the VERASENSE for Exactech Equinoxe to the

activation magnet to complete the activation sequence.

If VERASENSE for Exactech Equinoxe is showing no load values

in the shoulder, or load values are being shown when it has been

removed from the shoulder and no load is being applied:

• Re-Zero VERASENSE for Exactech Equinoxe.

DISPLAY UNIT

If Display Unit will not turn on, or shuts down inadvertently:

• Ensure the power cord is properly attached to the Display

Unit and plugged into a power outlet.

If Display Unit power button is blinking but nothing is

happening:

• The Display Unit is in sleep mode. Press the power button

to wake up the Display Unit.

ROLL STAND

(FOR LINKSTATION MINI ONLY)

If Roll Stand will not roll:

• Check to ensure that the breaks on the casters are

disengaged.

WIRELESS COMMUNICATION

If Communication is intermittent:

• Reposition the LinkStation MINI or LinkStation MINI

Evaluation Kit as close to the sterile boundary as possible

and within direct view of the surgeon.

• Objects such as OR lights, metal tables and mayo stands,

and people can potentially interfere with communication.

Bluetooth Communication:

• If communication cannot be reestablished, complete a force

restart of the LinkStation MINI or LinkStation MINI

Evaluation Kit by holding the power button on the display

unit down for 5 seconds. The system will reboot and

automatically reconnect to the device.