User's Guide

06/2019 LB-5200 Rev. 2
21
VERASENSE OrthoSensor.com
VERASENSE FOR EXACTECH
EQUINOXE SHUT DOWN
SHUTTING DOWN VERASENSE FOR EXACTECH EQUINOXE
STEP 1
To turn off VERASENSE for Exactech Equinoxe when the procedure
is complete, press the
EXIT button in the top right corner of the
Active Monitoring screen.
STEP 2
Confirm exit on the pop-up window by pressing OK. The “Shutting
down VERASENSE” dialog box will open.
NOTE
The VERASENSE for Exactech Equinoxe will communicate via
Bluetooth to power the device down. If communication can no
longer be achieved, the “VERASENSE shutdown failed” box will
open. Select
EXIT HOME SCREEN to exit the VERASENSE Software
Application for Shoulder.
* Center of load and load values outside of the Green Zone are for reference only.
Shutting down VERASENSE...
VERASENSE shutdown failed. Try again?
Exit
Home
Screen
RETRY
VERASENSE connected.
Are you sure you want to exit?
CANCEL
OK
EXIT
OPTIONS
ZERO
TRACK
Center of load and load values outside of the Green Zone are for reference only.
Center of load and load values outside of the Green Zone are for reference only.
Center of load and load values outside of the Green Zone are for reference only.