User's Guide

06/2019 LB-5200 Rev. 2
18
VERASENSE OrthoSensor.com
VERASENSE overload detected
Center of load and load values outside of the Green Zone are for reference only.
VERASENSE FOR EXACTECH EQUINOXE RE-ZERO LOAD
RE-ZEROING
If VERASENSE for Exactech Equinoxe experiences elevated loads,
a re-zero calibration may be required for accurate load readings.
A user can perform a re-zero as follows:
MENU ZERO BUTTON
Remove loaded VERASENSE for Exactech Equinoxe and then
press the Zero Button on the VERASENSE Software
Application for Shoulder.
Re-Zero Enabled
Re-Zero Completed
Center of load and load values outside of the Green Zone are for reference only.
Center of load and load values outside of the Green Zone are for reference only.