User's Guide

06/2019 LB-5200 Rev. 2

VERASENSE OrthoSensor.com

VERASENSE FOR EXACTECH EQUINOXE ACTIVATION

ACTIVATE VERASENSE FOR

EXACTECH EQUINOXE

STEP 1

Select appropriate VERASENSE for Exactech Equinoxe size and remove

VERASENSE for Exactech Equinoxe and shims from outer box.

• DO NOT remove from sterile pouch.

STEP 2

Activate VERASENSE for Exactech Equinoxe by holding it stationary up

against the magnet.

NOTE: For the LinkStation MINI only, the magnet is mounted on the roll stand.

STEP 3

DO NOT REMOVE VERASENSE FOR EXACTECH EQUINOXE FROM THE

MAGNET UNTIL EACH OF THE FOLLOWING ACTIVATION STEPS OCCURS:

• An LED light will illuminate in VERASENSE for Exactech Equinoxe

after approximately one (1) second. The light turns off after

approximately four (4) seconds.

• The VERASENSE Software Application for Shoulder will recognize

VERASENSE for Exactech Equinoxe and initializes communication.

NOTE

To optimize battery life, do not activate VERASENSE for Exactech

Equinoxe until just before it is required in the surgical workflow.

VERASENSE for Exactech Equinoxe has a 40 minute battery life.

LINKSTATION MINI